slaMonitorRtpResultsSrcAddressType
SLA-MONITOR-MIB ·
.1.3.6.1.4.1.45.4.8.1.2.5.1.2
Object
column
INET-ADDRESS-MIBInetAddressType
Specifies the address type of the source IP address used for this test.
Context
- MIB
- SLA-MONITOR-MIB
- OID
.1.3.6.1.4.1.45.4.8.1.2.5.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- slaMonitorRtpResultsEntry
- Table
- slaMonitorRtpResultsTable
- Siblings
- 17
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| slaMonitorRtpResultsOperStatus Reflects the operational state of an slaMonitorRtpCtrlEntry:
inProgress(1) - test is active.
aborted(2) - test has been stopped. Refer to object
… | column | Enumeration | .1.3.6.1.4.1.45.4.8.1.2.5.1.1 |
| slaMonitorRtpResultsMedianDelay The median network delay (RTT) experienced during this
test sequence, in microseconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.8.1.2.5.1.10 |
| slaMonitorRtpResultsPacketLoss A count of packets lost during this test sequence. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.8.1.2.5.1.11 |
| slaMonitorRtpResultsOutOfOrderArrivals The number of out-of-order arrivals detected during
this test sequence. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.8.1.2.5.1.12 |
| slaMonitorRtpResultsJitterQuartile0 The quartile 0 network jitter value, in microseconds,
experienced during this test sequence. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.8.1.2.5.1.13 |
| slaMonitorRtpResultsJitterQuartile1 The quartile 1 network jitter value, in microseconds,
experienced during this test sequence. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.8.1.2.5.1.14 |
| slaMonitorRtpResultsJitterQuartile2 The quartile 2 network jitter value, in microseconds,
experienced during this test sequence. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.8.1.2.5.1.15 |
| slaMonitorRtpResultsJitterQuartile3 The quartile 3 network jitter value, in microseconds,
experienced during this test sequence. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.8.1.2.5.1.16 |
| slaMonitorRtpResultsJitterQuartile4 The quartile 4 network jitter value, in microseconds,
experienced during this test sequence. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.8.1.2.5.1.17 |
| slaMonitorRtpResultsAbortData Provides details for tests that were aborted.
Multiple bits may be set to convey test status. | column | Bits | .1.3.6.1.4.1.45.4.8.1.2.5.1.18 |
| slaMonitorRtpResultsSrcAddress Specifies the source IP address used
for this test. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.45.4.8.1.2.5.1.3 |
| slaMonitorRtpResultsDstAddressType Specifies the address type of the destination IP
address used for this test. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.45.4.8.1.2.5.1.4 |
| slaMonitorRtpResultsDstAddress Specifies the destination IP address used
for this test. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.45.4.8.1.2.5.1.5 |
| slaMonitorRtpResultsSrcPort Specifies the Layer 4 source port used for this test. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.45.4.8.1.2.5.1.6 |
| slaMonitorRtpResultsDstPort Specifies the Layer 4 destination port used for this test. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.45.4.8.1.2.5.1.7 |
| slaMonitorRtpResultsDscp Specifies the DSCP value contained in RTP test packets
generated by the agent for this test. | column | DIFFSERV-DSCP-TCDscp | .1.3.6.1.4.1.45.4.8.1.2.5.1.8 |
| slaMonitorRtpResultsAverageDelay The average network delay (RTT) experienced during this
test sequence, in microseconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.45.4.8.1.2.5.1.9 |