esPointAliasValueStr – SITEBOSS-450-STD-MIB

Object

column SNMPv2-TCDisplayString

For CC inputs, this is the CC active/inactive alias setting
setting value that currently corresponds to the event state.
So if the CC input is in the event state, then this object
is the active alias setting value.  If the CC input is in the
normal state, then this object is the inactive alias setting
value.
              
For relay/power outputs, this is the output active/inactive
alias setting value that currently corresponds to the output
state.  So if the output is in the active state, then this
object is the active alias setting value.  If the output is
in hte inactive state, then this object is the inactive alias
setting value.
              
For non-CC and non-output sensors, this is the same as the
esPointValueStr object.

Context

MIB: SITEBOSS-450-STD-MIB
OID: .1.3.6.1.4.1.3052.17.1.1.1.1.10
Type: column
Access: readonly
Status: current
Parent: esPointEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'SITEBOSS-450-STD-MIB' -M '/opt/observium/mibs/asentria:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SITEBOSS-450-STD-MIB::esPointAliasValueStr'

More examples

Read one indexed instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'SITEBOSS-450-STD-MIB' -M '/opt/observium/mibs/asentria:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'SITEBOSS-450-STD-MIB::esPointAliasValueStr.<esIndexES>.<esIndexPC>.<esIndexPoint>'

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'SITEBOSS-450-STD-MIB' -M '/opt/observium/mibs/asentria:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'SITEBOSS-450-STD-MIB::esPointAliasValueStr'

Syntax

SNMPv2-TCDisplayString

Source: SNMPv2-TCDisplayString
Base type: OctetString
Display format: 255a

Type Description

Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints

range: 0..255