commonVendor

SCTE-HMS-COMMON-MIB · .1.3.6.1.4.1.5591.1.3.1.2
MIB view Table view

Object

scalar mandatory OctetString 
Displays the manufacturer of the network element.
Displayed in human-readable format.

Context

MIB
SCTE-HMS-COMMON-MIB
OID
.1.3.6.1.4.1.5591.1.3.1.2
Type
scalar
Access
readonly
Status
mandatory
Parent
commonAdminGroup
Siblings
16

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
commonLogicalID mandatory
Specifies the logical ID for the network element used by network management systems. The ID will often remain with a specific location regardless of any specific network element'…
scalarOctetString.1.3.6.1.4.1.5591.1.3.1.1
commonCheckCode mandatory
This object reports the Check Code for the transponder's configuration. The check code is generated from objects which are stored in non-volatile memory as well as those objects …
scalarInteger32.1.3.6.1.4.1.5591.1.3.1.10
commonTrapCommunityString mandatory
This object defines the community string reported in a trap. The default value is 'public'. Use of this object does not preclude the use of enterprise specific mechanisms to defin…
scalarOctetString.1.3.6.1.4.1.5591.1.3.1.11
commonTamperStatus optional
Returns the status of the anti-tamper device of the network element. this object requires an entry in the Discrete Property Table. the intact(1) value represents ok, and the comp…
scalarEnumeration.1.3.6.1.4.1.5591.1.3.1.12
commonInternalTemperature optional
Measured temperature inside the NE's case/housing. Units degrees Celsius. This item requires an entry in the properties MIB
scalarInteger32.1.3.6.1.4.1.5591.1.3.1.13
commonTime optional
All values are unsigned 32 bit integers. Time since the Epoch (00:00:00 UTC, January 1, 1970), measured in seconds(POSIX).
scalarInteger32.1.3.6.1.4.1.5591.1.3.1.14
commonVarBindings mandatory
This object indicates the maximum number of entries in the variable-binding list which can be accepted by the unit. A value of 0 indicates no specified limit.
scalarInteger32.1.3.6.1.4.1.5591.1.3.1.15
commonResetCause mandatory
This object reports the cause of the last reset.
scalarEnumeration.1.3.6.1.4.1.5591.1.3.1.16
commonCraftStatus mandatory
This object reports the state of the craft interface. The status of this object does not imply any change to the transponder functionality through the MAC interface. Not all tran…
scalarEnumeration.1.3.6.1.4.1.5591.1.3.1.17
commonModelNumber mandatory
Displays the model number of the network element. Displayed in human-readable format.
scalarOctetString.1.3.6.1.4.1.5591.1.3.1.3
commonSerialNumber mandatory
Returns the Serial Number of the Network Element. Displayed in human-readable format.
scalarOctetString.1.3.6.1.4.1.5591.1.3.1.4
commonVendorInfo optional
Returns vendor-specific information. Displayed in human-readable format.
scalarOctetString.1.3.6.1.4.1.5591.1.3.1.5
commonNEStatus mandatory
Bit mask, identical to that used in the Status field of the STATRESP PDU. See SCTE 25-2 (formerly HMS004). Bit 0: CHNLRQST Bit 1: CNTNRM Bit…
scalarOctetString.1.3.6.1.4.1.5591.1.3.1.6
commonReset mandatory
This object is used to reset the NE by writing 1 to it. Other values written to the object have no effect. Reading the object returns a 1, and has no effect on the unit.
scalarEnumeration.1.3.6.1.4.1.5591.1.3.1.7
commonAlarmDetectionControl mandatory
This object is used to control the detection of alarms in this NE. When a threshold from either the property table or the discrete property table is crossed in a manner…
scalarEnumeration.1.3.6.1.4.1.5591.1.3.1.8
commonNetworkAddress mandatory
This variable reports the network address (e.g., IP address) of the NE. This object was added to support the generation of traps. The value is retained in non-volatile memory. Th…
scalarRFC1155-SMINetworkAddress.1.3.6.1.4.1.5591.1.3.1.9