commonAlarmDetectionControl
SCTE-HMS-COMMON-MIB ·
.1.3.6.1.4.1.5591.1.3.1.8
Object
scalar
mandatory
r/w
Enumeration
This object is used to control the detection of alarms in this NE.
When a threshold from either the property table or the discrete
property table is crossed in a manner described by that MIB, then
an alarm is said to have occurred. When the alarm is detected, an
entry is placed in the alarm log table, which serves as a log of the
most recent alarm events. When an alarm is detected, then an alarm
trap is also generated. A property which is not in the nominal
state will have an entry in the currentAlarmTable.
The detectionDisabled(1) value prevents the threshold detection
process associated with the property table and discrete property
table from running. The NE will not generate alarms. The contents
of the alarmLogTable, currentAlarmTable, each instance of
discreteAlarmState, and each instance of currentAlarmState
remain in the state prior to detectionDisabled being applied.
The detectionEnabled(2) value permits alarm detection to run.
The detection process continues from the state the transponder
was in prior to detectionEnabled being set.
The detectionEnabledAndRegenerate(3) value clears all alarm
information and permits alarm detection to run. All alarm
properties, both discrete and analog, are restored to the
nominal value before alarm detection runs. Any properties
that are in an alarm state SHALL NOT produce a 'return to normal'
alarm as part of the process. Setting this value clears the
alarmLogTable and the currentAlarmTable.
The detectionEnabledAndRegenerate(3) value is transient.
When setting commonAlarmDetectionControl to
detectionEnabledAndRegnerate(3), the response will contain
detectionEnabledAndRegnerate(3). Subsequent reads of the
object report detectionEnabled(2).
The detectionDisabled(1) value does not affect the generation
of hmsColdStart or hmsWarmStart traps. Traps added in
the future are assumed to be unaffected by this object,
unless stated in the description of that trap.
This object has a default value of detectionEnabled(2).
The value for this object is maintained in non-volatile memory.
Context
- MIB
- SCTE-HMS-COMMON-MIB
- OID
.1.3.6.1.4.1.5591.1.3.1.8- Type
- scalar
- Access
- readwrite
- Status
- mandatory
- Parent
- commonAdminGroup
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | detectionDisabled |
2 | detectionEnabled |
3 | detectionEnabledAndRegenerate |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| commonLogicalID mandatory Specifies the logical ID for the network element used by network
management systems. The ID will often remain with a specific location
regardless of any specific network element'… | scalar | OctetString | .1.3.6.1.4.1.5591.1.3.1.1 |
| commonCheckCode mandatory This object reports the Check Code for the transponder's
configuration. The check code is generated from objects
which are stored in non-volatile memory as well as those
objects … | scalar | Integer32 | .1.3.6.1.4.1.5591.1.3.1.10 |
| commonTrapCommunityString mandatory This object defines the community string reported in a trap.
The default value is 'public'.
Use of this object does not preclude the use of enterprise
specific mechanisms to defin… | scalar | OctetString | .1.3.6.1.4.1.5591.1.3.1.11 |
| commonTamperStatus optional Returns the status of the anti-tamper device of the network element.
this object requires an entry in the Discrete Property Table.
the intact(1) value represents ok, and the comp… | scalar | Enumeration | .1.3.6.1.4.1.5591.1.3.1.12 |
| commonInternalTemperature optional Measured temperature inside the NE's case/housing.
Units degrees Celsius.
This item requires an entry in the properties MIB | scalar | Integer32 | .1.3.6.1.4.1.5591.1.3.1.13 |
| commonTime optional All values are unsigned 32 bit integers.
Time since the Epoch (00:00:00 UTC, January 1, 1970),
measured in seconds(POSIX). | scalar | Integer32 | .1.3.6.1.4.1.5591.1.3.1.14 |
| commonVarBindings mandatory This object indicates the maximum number of entries in the
variable-binding list which can be accepted by the unit.
A value of 0 indicates no specified limit. | scalar | Integer32 | .1.3.6.1.4.1.5591.1.3.1.15 |
| commonResetCause mandatory This object reports the cause of the last reset. | scalar | Enumeration | .1.3.6.1.4.1.5591.1.3.1.16 |
| commonCraftStatus mandatory This object reports the state of the craft interface.
The status of this object does not imply any change to
the transponder functionality through the MAC interface.
Not all tran… | scalar | Enumeration | .1.3.6.1.4.1.5591.1.3.1.17 |
| commonVendor mandatory Displays the manufacturer of the network element.
Displayed in human-readable format. | scalar | OctetString | .1.3.6.1.4.1.5591.1.3.1.2 |
| commonModelNumber mandatory Displays the model number of the network element.
Displayed in human-readable format. | scalar | OctetString | .1.3.6.1.4.1.5591.1.3.1.3 |
| commonSerialNumber mandatory Returns the Serial Number of the Network Element.
Displayed in human-readable format. | scalar | OctetString | .1.3.6.1.4.1.5591.1.3.1.4 |
| commonVendorInfo optional Returns vendor-specific information.
Displayed in human-readable format. | scalar | OctetString | .1.3.6.1.4.1.5591.1.3.1.5 |
| commonNEStatus mandatory Bit mask, identical to that used in the Status field of
the STATRESP PDU. See SCTE 25-2 (formerly HMS004).
Bit 0: CHNLRQST
Bit 1: CNTNRM
Bit… | scalar | OctetString | .1.3.6.1.4.1.5591.1.3.1.6 |
| commonReset mandatory This object is used to reset the NE by writing 1 to it.
Other values written to the object have no effect.
Reading the object returns a 1, and has no effect on the unit. | scalar | Enumeration | .1.3.6.1.4.1.5591.1.3.1.7 |
| commonNetworkAddress mandatory This variable reports the network address (e.g., IP address) of
the NE. This object was added to support the generation of traps.
The value is retained in non-volatile memory. Th… | scalar | RFC1155-SMINetworkAddress | .1.3.6.1.4.1.5591.1.3.1.9 |