integraBifPortSpeed
SAF-INTEGRAB-MIB ·
.1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.5
Object
Link speed in bits per second.
Context
- MIB
- SAF-INTEGRAB-MIB
- OID
.1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Units
- bps
- Parent
- integraBifPortEntry
- Table
- integraBifStatusTable
- Siblings
- 13
Syntax
bps SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| integraBifPortStatIndex A unique value, greater than zero, for each physical
network interface. It is recommended that
values are assigned contiguously starting from 1. | column | Integer32 | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.1 |
| integraBifPortAutoneg Auto-negotiation status. Unknown means no info was received. | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.10 |
| integraBifPortDuplex Duplex status for the interface. | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.11 |
| integraBifPortSyncEthActive Synchronous Ethernet status.
Can be active(1) or inactive(0). | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.12 |
| integraBifPortSyncEthPrio Synchronous Ethernet priority. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.13 |
| integraBifPortFlowControl Flow control status. | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.14 |
| integraBifPortStatDescr Physical network interface description.
LAN1 is electrical, LAN2 and LAN3 are SFP
and WAN is radio port. | column | OctetString | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.2 |
| integraBifPortType The type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack. | column | IANAifType-MIBIANAifType | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.3 |
| integraBifPortMtu Maximum transmission unit value in bytes. | column | B SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.4 |
| integraBifPortPhysAddress The interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line),… | column | RFC1213-MIBPhysAddress | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.6 |
| integraBifPortAdminStatus Desired state of network interfaces. Interfaces
can be enabled(1), disabled(2), unknown(3) (no info received). | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.7 |
| integraBifPortOperStatus Actual state of interfaces. Link can be up(1),
down(2) or in unknown(3) state. | column | Enumeration | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.8 |
| integraBifPortLastChange This parameter value is always 0 at the moment. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.7571.100.1.1.7.1.5.1.1.9 |