s5SbsAutoLearningConfigTable
S5-SWITCH-BAYSECURE-MIB ·
.1.3.6.1.4.1.45.1.6.5.3.22
Object
table
A table containing per-port configuration for auto-learning. Entries exist in the table for each ethernet port in the system.
Context
- MIB
- S5-SWITCH-BAYSECURE-MIB
- OID
.1.3.6.1.4.1.45.1.6.5.3.22- Type
- table
- Status
- current
- Parent
- s5SbsAuth
- Siblings
- 25
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| s5SbsAuthSecurityLock If s5SbsAuthSecurityLock is locked(2), the agent will refuse
all requests to modify the 'security configuration'.
Objects in s5SbsAuth, the Switch BaySecure MIB Group
that are pa… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.5.3.1 |
| s5SbsAuthCfgTable A table containing a list of boards and ports and MAC
addresses that constitute the security configuration. | table | - | .1.3.6.1.4.1.45.1.6.5.3.10 |
| s5SbsAuthStatusTable A table containing a snapshot of the authorized boards
and ports status data collection. Port security
information consists of an action to be performed when
an unAuthorized st… | table | - | .1.3.6.1.4.1.45.1.6.5.3.11 |
| s5SbsViolationStatusTable A table containing a list of boards, ports where
network access violations have occurred. Information
also contains the offending MAC addrersses. | table | - | .1.3.6.1.4.1.45.1.6.5.3.12 |
| s5SbsMgmViolationType Type of management access attempted when the violation
occurred. | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.5.3.13 |
| s5SbsMgmViolationIpAddress IP Address of the station attempting unauthorized
management access. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.45.1.6.5.3.14 |
| s5SbsPortSecurityStatus The set of ports for which security is enabled.
The bitwise AND of s5SbsPortSecurityStatus and
s5SbsPortLearnStatus must be the empty set. | scalar | PortSet | .1.3.6.1.4.1.45.1.6.5.3.15 |
| s5SbsPortLearnStatus The set of ports for which auto learning is enabled. Note that
a port's bit in this object may not be turned on if the port's
value of s5SbsAutoLearningConfigEnabled is true(1). | scalar | PortSet | .1.3.6.1.4.1.45.1.6.5.3.16 |
| s5SbsCurrSecurityLists The current number of entries of the Security lists in the
s5SbsSecurityListTable. | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.5.3.17 |
| s5SbsMaxSecurityLists The maximum number of entries of the Security lists in the
s5SbsSecurityListTable. | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.5.3.18 |
| s5SbsSecurityListTable A table containing a list of Security port lists. | table | - | .1.3.6.1.4.1.45.1.6.5.3.19 |
| s5SbsAuthCtlPartTime If the value of s5SbsAuthCfgActionMode is partitionPort or
partitionPortAndSendTrap, time partition will be done if this
value is greater than 0. The value indicates the duratio… | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.5.3.2 |
| s5SbsMacViolation | node | - | .1.3.6.1.4.1.45.1.6.5.3.20 |
| s5SbsAutoLearningAgingTime The lifetime for MAC addresses which are auto-learned. This
is measured in minutes. A value of 0 means addresses are not
aged out. | scalar | Minutes Integer32 | .1.3.6.1.4.1.45.1.6.5.3.21 |
| s5SbsAutoLearningPorts This object specifies the set of ports for which auto-
learning is enabled. It is an alternative to
s5SbsAutoLearningConfigEnabled. | scalar | PortSet | .1.3.6.1.4.1.45.1.6.5.3.23 |
| s5SbsAutoLearningSticky This object controls whether the 'sticky-mac' feature is enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.1.6.5.3.24 |
| s5SbsSecurityLockoutPortList This object controls the set of ports that are locked such that they
cannot have mac-security enabled. | scalar | PortSet | .1.3.6.1.4.1.45.1.6.5.3.25 |
| s5SbsDaFilteringTable A table containing a list of destination MAC addresses
based on which MAC Security will filter the frames. | table | - | .1.3.6.1.4.1.45.1.6.5.3.26 |
| s5SbsSecurityStatus Indicates whether the switch security feature is enabled or not. | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.5.3.3 |
| s5SbsSecurityMode The mode of switch security. singleMACperPort(1) indicates
that the switch is in single-MAC-per-port mode which means it
allows to configure only one MAC address per port. macList… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.5.3.4 |
| s5SbsSecurityAction Action performed by software when a violation occurs (if
s5SbsSecurityStatus is enabled). The security action specified
here applies to all ports of the switch.
… | scalar | Enumeration | .1.3.6.1.4.1.45.1.6.5.3.5 |
| s5SbsCurrNodesAllowed The current number of entries of the nodes allowed in the
s5SbsAuthCfgTable. | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.5.3.6 |
| s5SbsMaxNodesAllowed The maximum number of entries of the nodes allowed in the
s5SbsAuthCfgTable. | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.5.3.7 |
| s5SbsCurrNodesBlocked The current number of entries of the nodes blocked in the
s5SbsAuthCfgTable. | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.5.3.8 |
| s5SbsMaxNodesBlocked The maximum number of entries of the nodes blocked
in the s5SbsAuthCfgTable. | scalar | Integer32 | .1.3.6.1.4.1.45.1.6.5.3.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| s5SbsAutoLearningConfigEntry An entry in this table | row | - | .1.3.6.1.4.1.45.1.6.5.3.22.1 |