ruckusSCGConfigWLANServicePriority
RUCKUS-SCG-CONFIG-WLAN-MIB ·
.1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.32
Object
column
r/w
Enumeration
Select the QOS service priority for the Wireless LAN.
Context
- MIB
- RUCKUS-SCG-CONFIG-WLAN-MIB
- OID
.1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.32- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ruckusSCGConfigWLANEntry
- Table
- ruckusSCGConfigWLANTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | high |
2 | low |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ruckusSCGConfigWLANID this Wireless LAN(WLAN) ID | column | Integer32 | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.1 |
| ruckusSCGConfigWLANAuthentication Authentication method choosen for this Wireless LAN. | column | Enumeration | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.10 |
| ruckusSCGConfigWLANEncryption Encryption method choosen for this Wireless LAN. | column | Enumeration | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.12 |
| ruckusSCGConfigWLANWEPKeyIndex Select the WEP key index for the WEP encryption.
for 802.1x wlan(eap), this node should not be set. | column | Integer32 | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.15 |
| ruckusSCGConfigWLANWEPKey Enter the Pass-phrase for the WEP encryption method.
Only 10 or 26 Hex character.such as: 1122334455.
for 802.1x wlan(eap), this node should not be set. | column | OctetString | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.16 |
| ruckusSCGConfigWLANSSID SSID for this Wireless LAN. | column | OctetString | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.2 |
| ruckusSCGConfigWLANWPACipherType Enter the encryption cipher method for the WPA encryption.
fpr WPA2,aes is only supported.null is only for read. | column | Enumeration | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.20 |
| ruckusSCGConfigWLANWPAKey Enter the Pass-phrase for the WPA encryption.
Specifies the WPA PSK (Wi-Fi Protected Access
Pre Shared key)
If the key length is 64 then all 64 characters should be in hex,
otherw… | column | OctetString | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.21 |
| ruckusSCGConfigWLANWirelessClientIsolation set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet.
for Guest and webauth WLAN type, it must be 'enable'. | column | Enumeration | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.28 |
| ruckusSCGConfigWLANDescription Description for this Wireless LAN. | column | OctetString | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.3 |
| ruckusSCGConfigWLANZeroITActivation Enable the Zero IT Activation Service of the Wireless LAN or not. | column | Enumeration | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.30 |
| ruckusSCGConfigWLANAccountingUpdateInterval Enter interval in minutes to update Accounting Server. | column | Integer32 | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.36 |
| ruckusSCGConfigWLANName Name for this Wireless LAN | column | OctetString | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.4 |
| ruckusSCGConfigWLANVlanID Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged. | column | Integer32 | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.45 |
| ruckusSCGZoneName Zone name for this wlan | column | OctetString | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.5 |
| ruckusSCGConfigWLANHideSSID Hide SSID, not to broadcast it SSID. | column | Enumeration | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.50 |
| ruckusSCGConfigWLANMaxClientsPerAP Select the Number of client devices the AP can service for the Wireless LAN. | column | Integer32 | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.55 |
| ruckusSCGConfigWLANWLANServiceType The the Service type for the Wireless LAN. | column | Enumeration | .1.3.6.1.4.1.25053.1.3.2.2.1.1.1.1.8 |