ruckusIpv6AclFilterRowStatus

RUCKUS-ACL-MIB · .1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.30
MIB view Table view

Object

column r/w SNMPv2-TCRowStatus 
The row status variable, used according to installation and
removal conventions for conceptual rows. Setting this object
to createAndGo(4) results in the creation of IPv6 ACL filter.
Setting this object to destroy(6) removes this IPv6 ACL filter.
Other values are ignored.

Context

MIB
RUCKUS-ACL-MIB
OID
.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.30
Type
column
Access
readwrite
Status
current
Parent
ruckusIpv6AclFilterEntry
Table
ruckusIpv6AclFilterTable
Siblings
29

Syntax

SNMPv2-TCRowStatus
Source
SNMPv2-TCRowStatus
Base type
Enumeration

Values & Constraints

Type Values
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ruckusIpv6AclFilterSeqNum
Specifies the sequence number for this ACL filter.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.1
ruckusIpv6AclFilterDestAddr
Destination Ipv6 address to match in packets.
columnINET-ADDRESS-MIBInetAddressIPv6.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.10
ruckusIpv6AclFilterDestPrefixLen
Destination Ipv6 address prefix length.
columnUnsigned32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.11
ruckusIpv6AclFilterDestOperator
Type of comparison to perform. For now, this only applies to TCP/UDP for comparing the port number.
columnAclOperator.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.12
ruckusIpv6AclFilterDestPortLow
Specifies the TCP/UDP port number to match in packets. If the operator is 'range', it specfies the start of range.
columnUnsigned32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.13
ruckusIpv6AclFilterDestPortHigh
Used only if the operator is defined as 'range', where it specifies the end of range
columnUnsigned32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.14
ruckusIpv6AclFilterEstablished
Enable/Disable the filtering of established TCP packets of which the ACK or RESET flag is on. This filter only applies to TCP transport protocol.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.15
ruckusIpv6AclFilterIcmpType
Specifies the ICMP6 type for matching if the Protocol is ICMP6. 0 means ignore the field.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.16
ruckusIpv6AclFilterIcmpCode
ICMP Message Code value. Used in combination with ICMP Message Type to setup an ICMP filter. This object is not used with any other protocol. 0 means ignored. The supported values…
columnInteger32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.17
ruckusIpv6AclFilterExtIcmpType
Any type that can't be specified using the standard types can be specified using this object.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.18
ruckusIpv6AclFilterPolicyName
Specifies the DSCP value to use in matching or marking.
columnAclPolicyName.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.19
ruckusIpv6AclFilterAction
Action to take if the IPv6 packet matches with this access control list filter.
columnAclAction.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.2
ruckusIpv6AclFilterDscpMatch
Specifies the DSCP value for matching with this filter.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.20
ruckusIpv6AclFilterDscpForce
Specifies the DSCP value to be used for marking in outgoing packets matching this filter.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.21
ruckusIpv6AclFilterPriorityMatch
Specifies the 802.1P priority for matching with this filter.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.22
ruckusIpv6AclFilterPriorityForce
Specifies the 802.1P priority to be used for marking in outgoing packets matching this filter.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.23
ruckusIpv6AclFilterInternalPriority
QoS priority option for this filter.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.24
ruckusIpv6AclFilterFragments
Match IPv6 fragments with non-zero fragment offset in V6 packets matching this ACL permit clause.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.25
ruckusIpv6AclFilterSourceRoute
Match only rource routed packets matching this ACL permit clause.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.26
ruckusIpv6AclFilterMirrorPkts
Mirror packets matching ACL permit clause.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.27
ruckusIpv6AclFilterLogEnable
Specifies if logging is enabled for the filter.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.28
ruckusIpv6AclFilterComments
Remark description of individual Access Control List entry.
columnOctetString.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.29
ruckusIpv6AclFilterStdProtocol
Standard transport protocols allowed. The extended option enables to define other protocol using the OID ruckusIpv6AclFilterExtProtocol which takes any value.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.3
ruckusIpv6AclFilterExtProtocol
Any transport protocol other than standard protocols mentioned with ruckusIpv6AclFilterStdProtocol OID. 0 means any protocol.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.4
ruckusIpv6AclFilterSrcAddr
Source Ipv6 address to match in packets.
columnINET-ADDRESS-MIBInetAddressIPv6.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.5
ruckusIpv6AclFilterSrcPrefixLen
Source Ipv6 address prefix length.
columnUnsigned32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.6
ruckusIpv6AclFilterSrcOperator
Type of comparison to perform. For now, this only applies to TCP/UDP for comparing the port number.
columnAclOperator.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.7
ruckusIpv6AclFilterSrcPortLow
Specifies the TCP/UDP port number to match in packets. If the operator is 'range', it specfies the start of range.
columnUnsigned32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.8
ruckusIpv6AclFilterSrcPortHigh
Used only if the operator is defined as 'range', where it specifies the end of range
columnUnsigned32.1.3.6.1.4.1.1991.1.1.3.45.1.2.2.1.1.9