protocolDirAddressMapConfig
RMON2-MIB ·
.1.3.6.1.2.1.16.11.2.1.6
Object
column
r/w
Enumeration
This object describes and configures the probe's support for
address mapping for this protocol. When the probe creates
entries in this table for all protocols that it understands,
it will set the entry to notSupported(1) if it doesn't have
the capability to perform address mapping for the protocol or
if this protocol is not a network-layer protocol. When
an entry is created in this table by a management operation as
part of the limited extensibility feature, the probe must set
this value to notSupported(1), because limited extensibility
of the protocolDirTable does not extend to interpreting
addresses of the extended protocols.
If the value of this object is notSupported(1), the probe
will not perform address mapping for this protocol and
shall not allow this object to be changed to any other value.
If the value of this object is supportedOn(3), the probe
supports address mapping for this protocol and is configured
to perform address mapping for this protocol for all
addressMappingControlEntries and all interfaces.
If the value of this object is supportedOff(2), the probe
supports address mapping for this protocol but is configured
to not perform address mapping for this protocol for any
addressMappingControlEntries and all interfaces.
Whenever this value changes from supportedOn(3) to
supportedOff(2), the probe shall delete all related entries in
the addressMappingTable.
Context
- MIB
- RMON2-MIB
- OID
.1.3.6.1.2.1.16.11.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- protocolDirEntry
- Table
- protocolDirTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notSupported |
2 | supportedOff |
3 | supportedOn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| protocolDirID A unique identifier for a particular protocol. Standard
identifiers will be defined in such a manner that they
can often be used as specifications for new protocol… | column | OctetString | .1.3.6.1.2.1.16.11.2.1.1 |
| protocolDirStatus The status of this protocol directory entry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
If… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.16.11.2.1.10 |
| protocolDirParameters A set of parameters for the associated protocolDirID.
See the associated RMON2 Protocol Identifiers document
for a description of the possible parameters. There
will be one octet… | column | OctetString | .1.3.6.1.2.1.16.11.2.1.2 |
| protocolDirLocalIndex The locally arbitrary but unique identifier associated
with this protocolDir entry.
The value for each supported protocol must remain constant at
least from one re-… | column | Integer32 | .1.3.6.1.2.1.16.11.2.1.3 |
| protocolDirDescr A textual description of the protocol encapsulation.
A probe may choose to describe only a subset of the
entire encapsulation (e.g., only the highest layer).
This o… | column | OctetString | .1.3.6.1.2.1.16.11.2.1.4 |
| protocolDirType This object describes 2 attributes of this protocol
directory entry.
The presence or absence of the 'extensible' bit describes
whether this protocol directory entry… | column | Bits | .1.3.6.1.2.1.16.11.2.1.5 |
| protocolDirHostConfig This object describes and configures the probe's support for
the network-layer and application-layer host tables for this
protocol. When the probe creates entries in this table f… | column | Enumeration | .1.3.6.1.2.1.16.11.2.1.7 |
| protocolDirMatrixConfig This object describes and configures the probe's support for
the network-layer and application-layer matrix tables for this
protocol. When the probe creates entries in this table… | column | Enumeration | .1.3.6.1.2.1.16.11.2.1.8 |
| protocolDirOwner The entity that configured this entry and is
therefore using the resources assigned to it. | column | RMON-MIBOwnerString | .1.3.6.1.2.1.16.11.2.1.9 |