channelEventStatus
RMON-MIB ·
.1.3.6.1.2.1.16.7.2.1.8
Object
column
r/w
Enumeration
The event status of this channel.
If this channel is configured to generate events
when packets are matched, a means of controlling
the flow of those events is often needed. When
this object is equal to eventReady(1), a single
event may be generated, after which this object
will be set by the probe to eventFired(2). While
in the eventFired(2) state, no events will be
generated until the object is modified to
eventReady(1) (or eventAlwaysReady(3)). The
management station can thus easily respond to a
notification of an event by re-enabling this object.
If the management station wishes to disable this
flow control and allow events to be generated
at will, this object may be set to
eventAlwaysReady(3). Disabling the flow control
is discouraged as it can result in high network
traffic or other performance problems.
Context
- MIB
- RMON-MIB
- OID
.1.3.6.1.2.1.16.7.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- channelEntry
- Table
- channelTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | eventReady |
2 | eventFired |
3 | eventAlwaysReady |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| channelIndex An index that uniquely identifies an entry in the channel
table. Each such entry defines one channel, a logical
data and event stream.
It is suggested that before … | column | Integer32 | .1.3.6.1.2.1.16.7.2.1.1 |
| channelDescription A comment describing this channel. | column | OctetString | .1.3.6.1.2.1.16.7.2.1.10 |
| channelOwner The entity that configured this entry and is therefore
using the resources assigned to it. | column | OwnerString | .1.3.6.1.2.1.16.7.2.1.11 |
| channelStatus The status of this channel entry. | column | EntryStatus | .1.3.6.1.2.1.16.7.2.1.12 |
| channelIfIndex The value of this object uniquely identifies the
interface on this remote network monitoring device to which
the associated filters are applied to allow data into this
channel. T… | column | Integer32 | .1.3.6.1.2.1.16.7.2.1.2 |
| channelAcceptType This object controls the action of the filters
associated with this channel. If this object is equal
to acceptMatched(1), packets will be accepted to this
channel if they are acc… | column | Enumeration | .1.3.6.1.2.1.16.7.2.1.3 |
| channelDataControl This object controls the flow of data through this channel.
If this object is on(1), data, status and events flow
through this channel. If this object is off(2), data,
status and… | column | Enumeration | .1.3.6.1.2.1.16.7.2.1.4 |
| channelTurnOnEventIndex The value of this object identifies the event
that is configured to turn the associated
channelDataControl from off to on when the event is
generated. The event identified by a p… | column | Integer32 | .1.3.6.1.2.1.16.7.2.1.5 |
| channelTurnOffEventIndex The value of this object identifies the event
that is configured to turn the associated
channelDataControl from on to off when the event is
generated. The event identified by a p… | column | Integer32 | .1.3.6.1.2.1.16.7.2.1.6 |
| channelEventIndex The value of this object identifies the event
that is configured to be generated when the
associated channelDataControl is on and a packet
is matched. The event identified by a p… | column | Integer32 | .1.3.6.1.2.1.16.7.2.1.7 |
| channelMatches The number of times this channel has matched a packet.
Note that this object is updated even when
channelDataControl is set to off. | column | Packets SNMPv2-SMICounter32 | .1.3.6.1.2.1.16.7.2.1.9 |