bufferControlChannelIndex
RMON-MIB ·
.1.3.6.1.2.1.16.8.1.1.2
Object
column
r/w
Integer32
An index that identifies the channel that is the
source of packets for this bufferControl table.
The channel identified by a particular value of this
index is the same as identified by the same value of
the channelIndex object.
This object may not be modified if the associated
bufferControlStatus object is equal to valid(1).
Context
- MIB
- RMON-MIB
- OID
.1.3.6.1.2.1.16.8.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- bufferControlEntry
- Table
- bufferControlTable
- Siblings
- 12
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bufferControlIndex An index that uniquely identifies an entry
in the bufferControl table. The value of this
index shall never be zero. Each such
entry defines one set of packets that is
captured a… | column | Integer32 | .1.3.6.1.2.1.16.8.1.1.1 |
| bufferControlCapturedPackets The number of packets currently in this captureBuffer. | column | Packets SNMPv2-SMIInteger32 | .1.3.6.1.2.1.16.8.1.1.10 |
| bufferControlTurnOnTime The value of sysUpTime when this capture buffer was
first turned on. | column | SNMPv2-SMITimeTicks | .1.3.6.1.2.1.16.8.1.1.11 |
| bufferControlOwner The entity that configured this entry and is therefore
using the resources assigned to it. | column | OwnerString | .1.3.6.1.2.1.16.8.1.1.12 |
| bufferControlStatus The status of this buffer Control Entry. | column | EntryStatus | .1.3.6.1.2.1.16.8.1.1.13 |
| bufferControlFullStatus This object shows whether the buffer has room to
accept new packets or if it is full.
If the status is spaceAvailable(1), the buffer is
accepting new packets normal… | column | Enumeration | .1.3.6.1.2.1.16.8.1.1.3 |
| bufferControlFullAction Controls the action of the buffer when it
reaches the full status. When in the lockWhenFull(1)
state and a packet is added to the buffer that
fills the buffer, the bufferControlF… | column | Enumeration | .1.3.6.1.2.1.16.8.1.1.4 |
| bufferControlCaptureSliceSize The maximum number of octets of each packet
that will be saved in this capture buffer.
For example, if a 1500 octet packet is received by
the probe and this object is set to 500, … | column | Octets SNMPv2-SMIInteger32 | .1.3.6.1.2.1.16.8.1.1.5 |
| bufferControlDownloadSliceSize The maximum number of octets of each packet
in this capture buffer that will be returned in
an SNMP retrieval of that packet. For example,
if 500 octets of a packet have been sto… | column | Octets SNMPv2-SMIInteger32 | .1.3.6.1.2.1.16.8.1.1.6 |
| bufferControlDownloadOffset The offset of the first octet of each packet
in this capture buffer that will be returned in
an SNMP retrieval of that packet. For example,
if 500 octets of a packet have been st… | column | Octets SNMPv2-SMIInteger32 | .1.3.6.1.2.1.16.8.1.1.7 |
| bufferControlMaxOctetsRequested The requested maximum number of octets to be
saved in this captureBuffer, including any
implementation-specific overhead. If this variable
is set to -1, the capture buffer will sa… | column | Octets SNMPv2-SMIInteger32 | .1.3.6.1.2.1.16.8.1.1.8 |
| bufferControlMaxOctetsGranted The maximum number of octets that can be
saved in this captureBuffer, including overhead.
If this variable is -1, the capture buffer will save
as many octets as possible.
… | column | Octets SNMPv2-SMIInteger32 | .1.3.6.1.2.1.16.8.1.1.9 |