alarmValue
RMON-MIB ·
.1.3.6.1.2.1.16.3.1.1.5
Object
column
SNMPv2-SMIInteger32
The value of the statistic during the last sampling
period. For example, if the sample type is deltaValue,
this value will be the difference between the samples
at the beginning and end of the period. If the sample
type is absoluteValue, this value will be the sampled
value at the end of the period.
This is the value that is compared with the rising and
falling thresholds.
The value during the current sampling period is not
made available until the period is completed and will
remain available until the next period completes.
Context
- MIB
- RMON-MIB
- OID
.1.3.6.1.2.1.16.3.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- alarmEntry
- Table
- alarmTable
- Siblings
- 11
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alarmIndex An index that uniquely identifies an entry in the
alarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device. | column | Integer32 | .1.3.6.1.2.1.16.3.1.1.1 |
| alarmFallingEventIndex The index of the eventEntry that is
used when a falling threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same … | column | Integer32 | .1.3.6.1.2.1.16.3.1.1.10 |
| alarmOwner The entity that configured this entry and is therefore
using the resources assigned to it. | column | OwnerString | .1.3.6.1.2.1.16.3.1.1.11 |
| alarmStatus The status of this alarm entry. | column | EntryStatus | .1.3.6.1.2.1.16.3.1.1.12 |
| alarmInterval The interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaV… | column | Seconds SNMPv2-SMIInteger32 | .1.3.6.1.2.1.16.3.1.1.2 |
| alarmVariable The object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
Gauge… | column | ObjectIdentifier | .1.3.6.1.2.1.16.3.1.1.3 |
| alarmSampleType The method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the se… | column | Enumeration | .1.3.6.1.2.1.16.3.1.1.4 |
| alarmStartupAlarm The alarm that may be sent when this entry is first
set to valid. If the first sample after this entry
becomes valid is greater than or equal to the
risingThreshold and alarmStar… | column | Enumeration | .1.3.6.1.2.1.16.3.1.1.6 |
| alarmRisingThreshold A threshold for the sampled statistic. When the current
sampled value is greater than or equal to this threshold,
and the value at the last sampling interval was less than
this t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.16.3.1.1.7 |
| alarmFallingThreshold A threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold,
and the value at the last sampling interval was greater than
this t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.2.1.16.3.1.1.8 |
| alarmRisingEventIndex The index of the eventEntry that is
used when a rising threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same v… | column | Integer32 | .1.3.6.1.2.1.16.3.1.1.9 |