egpNeighEventTrigger

RFC1213-MIB · .1.3.6.1.2.1.8.5.1.15
MIB view Table view

Object

column mandatory r/w Enumeration 
A control variable used to trigger operator-
initiated Start and Stop events.  When read, this
variable always returns the most recent value that
egpNeighEventTrigger was set to.  If it has not
been set since the last initialization of the
network management subsystem on the node, it
returns a value of `stop'.
              
When set, this variable causes a Start or Stop
event on the specified neighbor, as specified on
pages 8-10 of RFC 904.  Briefly, a Start event
causes an Idle peer to begin neighbor acquisition
and a non-Idle peer to reinitiate neighbor
acquisition.  A stop event causes a non-Idle peer
to return to the Idle state until a Start event
occurs, either via egpNeighEventTrigger or
otherwise.

Context

MIB
RFC1213-MIB
OID
.1.3.6.1.2.1.8.5.1.15
Type
column
Access
readwrite
Status
mandatory
Parent
egpNeighEntry
Table
egpNeighTable
Siblings
14

Syntax

Enumeration

Values & Constraints

Enumerated Values
1start
2stop

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
egpNeighState mandatory
The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented by a value that is one greater than the numerical value associated with…
columnEnumeration.1.3.6.1.2.1.8.5.1.1
egpNeighStateUps mandatory
The number of EGP state transitions to the UP state with this EGP peer.
columnRFC1155-SMICounter.1.3.6.1.2.1.8.5.1.10
egpNeighStateDowns mandatory
The number of EGP state transitions from the UP state to any other state with this EGP peer.
columnRFC1155-SMICounter.1.3.6.1.2.1.8.5.1.11
egpNeighIntervalHello mandatory
The interval between EGP Hello command retransmissions (in hundredths of a second). This represents the t1 timer as defined in RFC 904.
columnInteger32.1.3.6.1.2.1.8.5.1.12
egpNeighIntervalPoll mandatory
The interval between EGP poll command retransmissions (in hundredths of a second). This represents the t3 timer as defined in RFC 904.
columnInteger32.1.3.6.1.2.1.8.5.1.13
egpNeighMode mandatory
The polling mode of this EGP entity, either passive or active.
columnEnumeration.1.3.6.1.2.1.8.5.1.14
egpNeighAddr mandatory
The IP address of this entry's EGP neighbor.
columnRFC1155-SMIIpAddress.1.3.6.1.2.1.8.5.1.2
egpNeighAs mandatory
The autonomous system of this EGP peer. Zero should be specified if the autonomous system number of the neighbor is not yet known.
columnInteger32.1.3.6.1.2.1.8.5.1.3
egpNeighInMsgs mandatory
The number of EGP messages received without error from this EGP peer.
columnRFC1155-SMICounter.1.3.6.1.2.1.8.5.1.4
egpNeighInErrs mandatory
The number of EGP messages received from this EGP peer that proved to be in error (e.g., bad EGP checksum).
columnRFC1155-SMICounter.1.3.6.1.2.1.8.5.1.5
egpNeighOutMsgs mandatory
The number of locally generated EGP messages to this EGP peer.
columnRFC1155-SMICounter.1.3.6.1.2.1.8.5.1.6
egpNeighOutErrs mandatory
The number of locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity.
columnRFC1155-SMICounter.1.3.6.1.2.1.8.5.1.7
egpNeighInErrMsgs mandatory
The number of EGP-defined error messages received from this EGP peer.
columnRFC1155-SMICounter.1.3.6.1.2.1.8.5.1.8
egpNeighOutErrMsgs mandatory
The number of EGP-defined error messages sent to this EGP peer.
columnRFC1155-SMICounter.1.3.6.1.2.1.8.5.1.9