rcNtpSysPrecision
RAISECOM-NTP-MIB ·
.1.3.6.1.4.1.8886.6.1.44.1.1.3
Object
scalar
SNMPv2-SMIInteger32
Signed integer indicating the precision of the system clock, in seconds to the nearest power of two. The value must be rounded to the next larger power of two; for instance, a 50-Hz (20 ms) or 60-Hz (16.67 ms) power-frequency clock would be assigned the value -5 (31.25 ms), while a 1000-Hz (1 ms) crystal-controlled clock would be assigned the value -9 (1.95 ms).
Context
- MIB
- RAISECOM-NTP-MIB
- OID
.1.3.6.1.4.1.8886.6.1.44.1.1.3- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- rcNtpSystem
- Siblings
- 13
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcNtpSysLeap Two-bit code warning of an impending leap second to
be inserted in the NTP timescale. This object can be
set only when the rcNtpSysStratum has a value of 1. | scalar | NTPLeapIndicator | .1.3.6.1.4.1.8886.6.1.44.1.1.1 |
| rcNtpSysClock The current local time. Local time is derived from
the hardware clock of the particular machine and
increments at intervals depending on the design used. | scalar | NTPTimeStamp | .1.3.6.1.4.1.8886.6.1.44.1.1.10 |
| rcNtpSysClockStatus Status or local clock,
setByNone: no set or unsynchronized,
setByManual: set by cmd or SNMP or other method,
setByTimeProtocol: set by time protocol | scalar | Enumeration | .1.3.6.1.4.1.8886.6.1.44.1.1.11 |
| rcNtpSysVersion deprecated Version of ntp,
v1: version 1,
v2: version 2,
v3: version 3. | scalar | Enumeration | .1.3.6.1.4.1.8886.6.1.44.1.1.12 |
| rcNtpSysMode The mode of host, with values coded as follows,
1, ntpMaster,switch as the NTP reference clock;
2, ntpSlave,switch as the NTP slave clock. | scalar | Enumeration | .1.3.6.1.4.1.8886.6.1.44.1.1.13 |
| rcNtpSysValidServicerIndex Find the next valid servicer clock index | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.44.1.1.14 |
| rcNtpSysStratum The stratum of the local clock. If the value is set
to 1, i.e., this is a primary reference, then the
Primary-Clock procedure described in Section 3.4.6,
in RFC-1305 is invoked. | scalar | NTPStratum | .1.3.6.1.4.1.8886.6.1.44.1.1.2 |
| rcNtpSysRootDelay A signed fixed-point number indicating the total
round-trip delay in seconds, to the primary reference
source at the root of the synchronization subnet. | scalar | seconds NTPSignedTimeValue | .1.3.6.1.4.1.8886.6.1.44.1.1.4 |
| rcNtpSysRootDispersion The maximum error in seconds, relative to the
primary reference source at the root of the
synchronization subnet. Only positive values greater
than zero are possible. | scalar | seconds NTPUnsignedTimeValue | .1.3.6.1.4.1.8886.6.1.44.1.1.5 |
| rcNtpSysRefId The reference identifier of the local clock. | scalar | NTPRefId | .1.3.6.1.4.1.8886.6.1.44.1.1.6 |
| rcNtpSysRefTime The local time when the local clock was last
updated. If the local clock has never been
synchronized, the value is zero. | scalar | NTPTimeStamp | .1.3.6.1.4.1.8886.6.1.44.1.1.7 |
| rcNtpSysPoll The interval at which the NTP server polls other NTP
servers to synchronize its clock. | scalar | Integer32 | .1.3.6.1.4.1.8886.6.1.44.1.1.8 |
| rcNtpSysPeer The current synchronization source. This will
contain the unique association identifier
rcNtpPeersAssocId of the corresponding peer entry in
the rcNtpPeersVarTable of the peer ac… | scalar | NTPAssocIdentifier | .1.3.6.1.4.1.8886.6.1.44.1.1.9 |