rlPimTmEntRegSrcAndGrpFilter

RADLAN-PIM-MIB · .1.3.6.1.4.1.89.211.6.1.19
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
When Register message filtering by source and group address
is enabled then:
              
-  for groups for which the local router is the RP, it
   will process received PIM Register messages as normal
   only if the {source, group} pair of the encapsulated
   multicast data packet is included in the extended
   access list corresponding to the list index value
   configured for this object; if the {source, group} pair
   is excluded from the extended access list, the local
   router will send a Register-Stop message, and
              
-  on interfaces on which the local router is the DR, it
   will encapsulate received multicast data packets and
   forward them in PIM Register messages only if the
   {source, group} pair of the multicast data packet is
   included in the extended access list corresponding to
   the list index value configured for this object.
              
In other words, the extended access list is a whitelist of
the {source, group} pairs for which the local router is
permitted to Register-encapsulate/decapsulate multicast
data packets.
              
rlPimTmEntRegSrcAndGrpFilter defaults to an empty string,
which indicates that no access list is specified.

Context

MIB
RADLAN-PIM-MIB
OID
.1.3.6.1.4.1.89.211.6.1.19
Type
column
Access
readwrite
Status
current
Parent
rlPimTmEntEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RADLAN-PIM-MIB' -M '/opt/observium/mibs/radlan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADLAN-PIM-MIB::rlPimTmEntRegSrcAndGrpFilter'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'RADLAN-PIM-MIB' -M '/opt/observium/mibs/radlan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADLAN-PIM-MIB::rlPimTmEntRegSrcAndGrpFilter.<rlPimTmEntIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'RADLAN-PIM-MIB' -M '/opt/observium/mibs/radlan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RADLAN-PIM-MIB::rlPimTmEntRegSrcAndGrpFilter'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255