rlPimTmEntAsmGrpFilter

RADLAN-PIM-MIB · .1.3.6.1.4.1.89.211.6.1.17
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
When ASM group filtering is enabled, then for groups in the
ASM space, the local router will:
              
-  process received PIM (*,G) Join and (S,G) Join messages
   only if the group address is included in the standard
   access list corresponding to the list index value
   configured for this object, and
              
-  accept (*,G) and (S,G) local membership requests from the
   MGMD Router component only if the group address is
   included in the standard access list corresponding to the
   list index value configured for this object.
              
In other words, the standard access list is a whitelist of
the ASM groups for which DC-PIM is permitted to request
traffic.
              
Note that DC-PIM will never Register-encapsulate multicast
data packets for groups that are blocked by this filter.
See rlPimTmEntRegSrcAndGrpFilter for additional Register
message filtering options.
              
rlPimTmEntAsmGrpFilter defaults to an empty string,
which indicates that no access list is specified.

Context

MIB
RADLAN-PIM-MIB
OID
.1.3.6.1.4.1.89.211.6.1.17
Type
column
Access
readwrite
Status
current
Parent
rlPimTmEntEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'RADLAN-PIM-MIB' -M '/opt/observium/mibs/radlan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADLAN-PIM-MIB::rlPimTmEntAsmGrpFilter'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'RADLAN-PIM-MIB' -M '/opt/observium/mibs/radlan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'RADLAN-PIM-MIB::rlPimTmEntAsmGrpFilter.<rlPimTmEntIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'RADLAN-PIM-MIB' -M '/opt/observium/mibs/radlan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'RADLAN-PIM-MIB::rlPimTmEntAsmGrpFilter'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255