rlPimInterfaceAsmGrpFilter
RADLAN-PIM-MIB ·
.1.3.6.1.4.1.89.211.1.1.18
Object
When ASM group filtering is enabled, then for groups in the
ASM space the local router will:
- process PIM (*,G) Join and (S,G) Join messages received on
this interface only if the group address is included in the
standard access list corresponding to the list index value
configured for this object
- only send PIM (*,G) Join and (S,G) Join messages over this
interface if the group address is included in the standard
access list corresponding to the list index value configured
for this object.
Local membership requests from the MGMD Router component are
not filtered. These should be filtered by the MGMD Router
component.
In other words, the standard access list is a whitelist of the
ASM groups for which DC-PIM is permitted to request or receive
traffic over the interface.
rlPimInterfaceAsmGrpFilter defaults to an empty string, which indicates
that no access list is specified. If the name does not correspond
to a valid access list, no group addresses will match the list
and therefore all PIM (*,G) Join and PIM (S,G) Join messages
will be filtered.
Context
- MIB
- RADLAN-PIM-MIB
- OID
.1.3.6.1.4.1.89.211.1.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rlPimInterfaceEntry
- Table
- rlPimInterfaceTable
- Siblings
- 16
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlPimInterfaceStarGStateWarnThold DC-PIM TIB Manager logs an exception if the number of
groups for which it is storing (*,G,I) state specific to
this interface exceeds this value. A value of zero means
that there… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.89.211.1.1.10 |
| rlPimInterfaceStarGStateStored The number of groups for which DC-PIM TIB Manager is
storing (*,G,I) state specific to this interface. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.89.211.1.1.11 |
| rlPimInterfaceSGStateLimit The maximum number of {source, group} pairs for which
DC-PIM TIB Manager is allowed to store (S,G,I) state
specific to this interface. A value of zero means that
there is no limi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.89.211.1.1.12 |
| rlPimInterfaceSGStateWarnThold DC-PIM TIB Manager logs an exception if the number of
{source, group} pairs for which it is storing (S,G,I) state
specific to this interface exceeds this value. A value of
zero m… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.89.211.1.1.13 |
| rlPimInterfaceSGStateStored The number of {source, group} pairs for which DC-PIM TIB
Manager is storing (S,G,I) state specific to this
interface. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.89.211.1.1.14 |
| rlPimInterfaceNeighborFilter When neighbor filtering is enabled, the local router
will process link-local multicast PIM messages received on
this interface only if the originator's IP address (that is,
the so… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.89.211.1.1.15 |
| rlPimInterfaceAssertInterval The frequency at which this router sends PIM Assert
messages on this interface when it is the assert winner.
This object corresponds to the 'Assert_Time' minus the
'Assert_Overrid… | column | seconds Unsigned32 | .1.3.6.1.4.1.89.211.1.1.16 |
| rlPimInterfaceAssertHoldtime The interval before this router leaves assert loser state
on this interface, unless it receives a PIM Assert message
that refreshes this state. This object corresponds to the
'As… | column | seconds Unsigned32 | .1.3.6.1.4.1.89.211.1.1.17 |
| rlPimInterfaceSsmSrcAndGrpFilter When SSM source and group filtering is enabled, then for groups in
the SSM space the local router will
- process PIM (S,G) Join messages received on this interface… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.89.211.1.1.19 |
| rlPimInterfaceAdminStatus The desired administrative state of this interface. | column | AdminStatus | .1.3.6.1.4.1.89.211.1.1.3 |
| rlPimInterfaceOperStatus The current operational state of this interface. | column | NpgOperStatus | .1.3.6.1.4.1.89.211.1.1.4 |
| rlPimInterfaceStubInterface Whether this interface is a 'stub interface' with regard to
PIM. If this is set to 'true', no PIM packets are sent or
processed (if received) on this interface. This should be
s… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.211.1.1.5 |
| rlPimInterfaceP2PNoHellos Whether this interface is a point-to-point interface on
which we do not require the neighbor to send PIM-Hello
signals. Provided for back-compatibility with some older
implementa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.211.1.1.6 |
| rlPimInterfaceMgmdEntIndex The HAF entity index of the DC-MGMD (for example, for IPv4
this is DC-IGMP) Router component that owns this interface.
Zero is a wildcard value meaning that no DC-MGMD Router
comp… | column | NumericIndexOrZero | .1.3.6.1.4.1.89.211.1.1.7 |
| rlPimInterfaceNeighborCount The number of PIM neighbors on this interface. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.89.211.1.1.8 |
| rlPimInterfaceStarGStateLimit The maximum number of groups for which DC-PIM TIB Manager
is allowed to store (*,G,I) state specific to this
interface. A value of zero means that there is no limit. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.89.211.1.1.9 |