rldot1xAuthenticationPortMethod
RADLAN-DOT1X-MIB ·
.1.3.6.1.4.1.89.95.10.1.1
Object
column
r/w
Enumeration
The value of the 802.1x-based, mac-based and web-based authentication.
Context
- MIB
- RADLAN-DOT1X-MIB
- OID
.1.3.6.1.4.1.89.95.10.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rldot1xAuthenticationPortEntry
- Table
- rldot1xAuthenticationPortTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | eapolOnly |
2 | macAndEapol |
3 | macOnly |
4 | webOnly |
5 | webAndEapol |
6 | webAndMac |
7 | webAndMacAndEapol |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rldot1xNumOfAuthorizedHosts Number of authorized host in multi-sessions mode. | column | Integer32 | .1.3.6.1.4.1.89.95.10.1.10 |
| rldot1xAuthenticationOpenEnabled Open access allows clients or devices to gain network access before authentication is performed.
In the mode the switch performs failure replies received from a Radius server as s… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.95.10.1.11 |
| rldot1xRadiusAttrVlanIdEnabled Defines if treat VLAN ID that received from Radius attributes
in Radius-Accept message. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.95.10.1.2 |
| rldot1xRadiusAttAclNameEnabled Defines if treat ACL Names that received from Radius attributes
in Radius-Accept message. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.95.10.1.3 |
| rldot1xTimeBasedName Specifies a time range. When the Time Range is not in effect the port state would be Unauthorized. | column | OctetString | .1.3.6.1.4.1.89.95.10.1.4 |
| rldot1xTimeBasedActive Specifies if time range is active now or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.95.10.1.5 |
| rldot1xRadiusAttrVlanIdentifier In case that value is not 0,
This field will define the VLAN ID in case that it is not received from Radius attributes
in Radius-Accept message. | column | Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.89.95.10.1.6 |
| rldot1xMaxHosts Maximum number of authenticated hosts allowed on the interface.
A value of 0 means no limitation. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.89.95.10.1.7 |
| rldot1xMaxLoginAttempts Maximum number of allowedlogin attempts on the interface.
A value of 0 means the infinite number of attemtps.
The configuration is applied only to Web-Based authentication. | column | Integer32 | .1.3.6.1.4.1.89.95.10.1.8 |
| rldot1xTimeoutSilencePeriod Set the number of seconds that if an authorized client did not send traffic during this period,
then the client is changed to unauthrized.
The configuration is applied only to Web… | column | Integer32 | .1.3.6.1.4.1.89.95.10.1.9 |