rlCdpVoiceVlanId
RADLAN-CDP-MIB ·
.1.3.6.1.4.1.89.137.7
Object
scalar
obsolete
r/w
Integer32
voice vlan Id, used as the Appliance Vlan-Id TLV
Context
- MIB
- RADLAN-CDP-MIB
- OID
.1.3.6.1.4.1.89.137.7- Type
- scalar
- Access
- readwrite
- Status
- obsolete
- Parent
- rlCdp
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlCdpVersionAdvertised Specifies the verison of sent CDP packets | scalar | RlCdpVersionTypes | .1.3.6.1.4.1.89.137.1 |
| rlCdpLogMismatchVoiceVlanEnable Enable logging messages when detecting mishmatch between
advertised and received voice VLAN.
To enable logging on specific interface set the corresponing bit. | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.89.137.10 |
| rlCdpLogMismatchNativeVlanEnable Enable logging messages when detecting mishmatch between
advertised and received native VLAN.
To enable loging on specific interface set the corresponing bit. | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.89.137.11 |
| rlCdpSecondaryCacheTable The (conceptual) table contains partial information from cdpCache table.
indexed by rlCdpSecondaryCacheEntry. | table | - | .1.3.6.1.4.1.89.137.12 |
| rlCdpGlobalLogMismatchDuplexEnable Globally enable/disable logging messages when detecting mishmatch between
advertised and received duplex mode. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.13 |
| rlCdpGlobalLogMismatchVoiceVlanEnable Globally enable/disable logging messages when detecting mishmatch between
advertised and received voice VLAN. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.14 |
| rlCdpGlobalLogMismatchNativeVlanEnable Globally enable/disable logging messages when detecting mishmatch between
advertised and received native VLAN. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.15 |
| rlCdpTlvTable The (conceptual) table contains the local advertised information.
indexed by rlCdpTlvEntry. | table | - | .1.3.6.1.4.1.89.137.16 |
| rlCdpAdvertiseApplianceTlv By setting the MIB to True Appliance VLAN-ID TLV may be advertised.
A value of False will prevent this TLV from being advertised. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.17 |
| rlCdpValidateMandatoryTlvs By setting the MIB to true all mandatory TLVs 0x0001-0x0006 will be validated.
Incoming CDP frames without any of the TLVs will be dropped.
A value of false indicates that only th… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.18 |
| rlCdpInterfaceCountersTable This table contains all CDP counter values, indexed by interface id. | table | - | .1.3.6.1.4.1.89.137.19 |
| rlCdpSourceInterface Specifices the CDP source-interface, which the IP address advertised
into TLV is accoding to this source-interface instead
of the outgoing interface.
value of 0 indicates no sourc… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.89.137.2 |
| rlCdpInterfaceCountersClear By setting the scalar to a interface id , all error and traffic counters of this interface
are set to zero.
To clear the counters for ALL interfaces set the scalar to 0x0FFFFFFF | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.89.137.20 |
| rlCdpTlvPowerRequestTable The (conceptual) table contains the local advertised requested power levels
in Power Requested TLV.
indexed by rlCdpTlvPowerRequestEntry. | table | - | .1.3.6.1.4.1.89.137.21 |
| rlCdpSecondaryCacheAddressTable The (conceptual) table containing the list of
network-layer addresses of a neighbor interface,
as reported in the Address TLV of the most recently
received CDP message and stored … | table | - | .1.3.6.1.4.1.89.137.22 |
| rlCdpSecondaryCacheRequestedPowerTable The (conceptual) table containing the list of
requested power levels by a remote device,
as reported in the Power Requested TLV of the most recently
received CDP message and store… | table | - | .1.3.6.1.4.1.89.137.23 |
| rlCdpLogMismatchDuplexEnable Enable logging messages when detecting mishmatch between
advertised and received duplex mode.
To enable loging on specific interface set the corresponing bit. | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.89.137.3 |
| rlCdpCountersTable This table contains all cdp counter values, indexed by conter name | table | - | .1.3.6.1.4.1.89.137.4 |
| rlCdpCountersClear By setting the MIB to True, all error and traffic counters are set to zero. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.5 |
| rlCdpCacheClear By setting the MIB to True, all entries from the cdp cache table is deleted. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.6 |
| rlCdpCacheTable The (conceptual) table contains externtion for the cdpCache table.
indexed by cdpCacheEntry. | table | - | .1.3.6.1.4.1.89.137.8 |
| rlCdpPduAction Defines CDP packets handling when CDP is globally disabled. | scalar | RlCdpPduActionTypes | .1.3.6.1.4.1.89.137.9 |