rlCdpValidateMandatoryTlvs
RADLAN-CDP-MIB ·
.1.3.6.1.4.1.89.137.18
Object
By setting the MIB to true all mandatory TLVs 0x0001-0x0006 will be validated.
Incoming CDP frames without any of the TLVs will be dropped.
A value of false indicates that only the Device ID TLV (0x0001) is mandatory.
Frames containing Device ID TLV will be processed,
regardless of whether other TLVs are present or not.
Context
- MIB
- RADLAN-CDP-MIB
- OID
.1.3.6.1.4.1.89.137.18- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rlCdp
- Siblings
- 22
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlCdpVersionAdvertised Specifies the verison of sent CDP packets | scalar | RlCdpVersionTypes | .1.3.6.1.4.1.89.137.1 |
| rlCdpLogMismatchVoiceVlanEnable Enable logging messages when detecting mishmatch between
advertised and received voice VLAN.
To enable logging on specific interface set the corresponing bit. | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.89.137.10 |
| rlCdpLogMismatchNativeVlanEnable Enable logging messages when detecting mishmatch between
advertised and received native VLAN.
To enable loging on specific interface set the corresponing bit. | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.89.137.11 |
| rlCdpSecondaryCacheTable The (conceptual) table contains partial information from cdpCache table.
indexed by rlCdpSecondaryCacheEntry. | table | - | .1.3.6.1.4.1.89.137.12 |
| rlCdpGlobalLogMismatchDuplexEnable Globally enable/disable logging messages when detecting mishmatch between
advertised and received duplex mode. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.13 |
| rlCdpGlobalLogMismatchVoiceVlanEnable Globally enable/disable logging messages when detecting mishmatch between
advertised and received voice VLAN. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.14 |
| rlCdpGlobalLogMismatchNativeVlanEnable Globally enable/disable logging messages when detecting mishmatch between
advertised and received native VLAN. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.15 |
| rlCdpTlvTable The (conceptual) table contains the local advertised information.
indexed by rlCdpTlvEntry. | table | - | .1.3.6.1.4.1.89.137.16 |
| rlCdpAdvertiseApplianceTlv By setting the MIB to True Appliance VLAN-ID TLV may be advertised.
A value of False will prevent this TLV from being advertised. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.17 |
| rlCdpInterfaceCountersTable This table contains all CDP counter values, indexed by interface id. | table | - | .1.3.6.1.4.1.89.137.19 |
| rlCdpSourceInterface Specifices the CDP source-interface, which the IP address advertised
into TLV is accoding to this source-interface instead
of the outgoing interface.
value of 0 indicates no sourc… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.89.137.2 |
| rlCdpInterfaceCountersClear By setting the scalar to a interface id , all error and traffic counters of this interface
are set to zero.
To clear the counters for ALL interfaces set the scalar to 0x0FFFFFFF | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.89.137.20 |
| rlCdpTlvPowerRequestTable The (conceptual) table contains the local advertised requested power levels
in Power Requested TLV.
indexed by rlCdpTlvPowerRequestEntry. | table | - | .1.3.6.1.4.1.89.137.21 |
| rlCdpSecondaryCacheAddressTable The (conceptual) table containing the list of
network-layer addresses of a neighbor interface,
as reported in the Address TLV of the most recently
received CDP message and stored … | table | - | .1.3.6.1.4.1.89.137.22 |
| rlCdpSecondaryCacheRequestedPowerTable The (conceptual) table containing the list of
requested power levels by a remote device,
as reported in the Power Requested TLV of the most recently
received CDP message and store… | table | - | .1.3.6.1.4.1.89.137.23 |
| rlCdpLogMismatchDuplexEnable Enable logging messages when detecting mishmatch between
advertised and received duplex mode.
To enable loging on specific interface set the corresponing bit. | scalar | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.89.137.3 |
| rlCdpCountersTable This table contains all cdp counter values, indexed by conter name | table | - | .1.3.6.1.4.1.89.137.4 |
| rlCdpCountersClear By setting the MIB to True, all error and traffic counters are set to zero. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.5 |
| rlCdpCacheClear By setting the MIB to True, all entries from the cdp cache table is deleted. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.89.137.6 |
| rlCdpVoiceVlanId obsolete voice vlan Id, used as the Appliance Vlan-Id TLV | scalar | Integer32 | .1.3.6.1.4.1.89.137.7 |
| rlCdpCacheTable The (conceptual) table contains externtion for the cdpCache table.
indexed by cdpCacheEntry. | table | - | .1.3.6.1.4.1.89.137.8 |
| rlCdpPduAction Defines CDP packets handling when CDP is globally disabled. | scalar | RlCdpPduActionTypes | .1.3.6.1.4.1.89.137.9 |