erpWTRStatus
RAD-EthIf-MIB ·
.1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.12
Object
column
SNMPv2-SMIUnsigned32
Wait to Restore (WTR) status.
When equals 0 - WTR is stopped.
Otherwise - WTR is running.
When WTR is running, there are two cases:
- If Agent supports counting down the WTR (from erpWTR to 0), this object
will represent the current value in the same units as erpWTR.
- If Agent doesn't support counting down the WTR, this object = 2^32-1.
Context
- MIB
- RAD-EthIf-MIB
- OID
.1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- erpEntry
- Table
- erpTable
- Siblings
- 33
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| erpIdx This is the unique Ethernet Protection Ring number. | column | Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.1 |
| erpOamCfmMel ERP MEL (Maintenance Entity Group Level).
Valid values are: 0..7.
Default=255. | column | Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.10 |
| erpWTR Wait to Restore (WTR) time in msec.
After the failed working transport entity recovers,
in order to prevent frequent operations of the
protection switch due to an intermittent def… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.11 |
| erpGuardTimer Guard Timer in msec.
The guard timer is used to prevent ring nodes
from receiving outdated R-APS messages.
During the duration of the Guard Timer, all received
R-APS messages, are… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.13 |
| erpHoldoffTimer Holdoff Timer in msec.
When Holdoff Timer>0, the Local SF signal starts the timer
and doesn't trigger the Ring Protection immediately.
In this case, when Holdoff Timer expired (or… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.14 |
| erpForceSfCmd SF (Signal Fail) command on a port of ERP.
eastOn= enforce SF command to East Port of ERP
westOn= enforce SF command to West Port of ERP
eastClear= Clear existing enforced SF comm… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.15 |
| erpClearStatistics bit 0 - Clear statistics command for ERP east port(when equals 1). It will cause
clearing all Statistics counters of this ERP port.
bit 1 - Clear statistics command for ERP west p… | column | Bits | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.16 |
| erpRapsVlanPriority Priority of the VLAN used for Ring APS (RAPS) messages.
Valid values are: 0..7.
Default=7. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.17 |
| erpDescr Description of the current ERP entry.
Default description will be: ' ' | column | OctetString | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.18 |
| erpRingType This object determines the Ring's type: MajorRing or SubRing.
Default=majorRing(1) | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.19 |
| erpRowStatus This object enables creation and deletion of entries
in the erpTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.2 |
| erpWTBStatus Wait To Block (WTR) status.
When equals 0 - WTR is stopped.
Otherwise - WTR is running.
When WTR is running, there are two cases:
- If Agent supports counting down the WTR (fro… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.20 |
| erpRevertiveMode In revertive operation, the traffic channel is restored to the
working transport entity, i.e., blocked on teh RPL, once the case of
clearing the defect, and after the expiration o… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.21 |
| erpBackwardCompatibility When the Ring Node of ERPv2 is part of a Ring, that is composed of
other Ring Nodes with ERPv1, it has to run in Compatibility Mode.
This mode filters the configuration and reques… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.22 |
| erpTopologyChangepropogation This object indicates whether to execute Flush Database (FDB) or not
in case the RPL owner will unblock the RPL Port. ERPv2 requires FDB in
order to relearn the correct filtering … | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.23 |
| erpInterconnectionNode The user will be able to configure the Node as an interconnection Node,
i.e., a Node that shares more than one Ring. Default value
shall be false(2). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.24 |
| erpCommand This object represents the external command the user can initiate
on the Node: Force Switch(1), Manual Switch(2), clearing any previous
command(3), or having no command at all (4)… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.25 |
| erpCommandParam This object indicates the port to which the external command
(erpCommand) will be issued. Default is notApplicable(1). | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.26 |
| erpEastPhyPort This object indicates the ifIndex of east Ethernet port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.27 |
| erpWestPhyPort This object indicates the ifIndex of west Ethernet port. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.28 |
| erpCosMapProfile This attribute point to the CoS mapping profile Table (cosInternalProfileTable). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.29 |
| erpAdminStatus This object determines the Ethernet Protection Ring
Administrative Status.
Value cannot be changed to Up,if erpRowStatus=notReady.
Value cannot be changed to Up,if the following c… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.3 |
| erpVirtualChannel This object defines whether or not virtual channel is used.
It is only relevant for subring nodes, and ignored by major ring nodes. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.30 |
| erpPassthroughVids This object contains a 4096 bit vector indicating VIDs passing
through the ring, without being terminated like data VLANs are.
The high order bit of the first octet corresponds to… | column | OctetString | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.31 |
| erpColorMapProfile If this object is zero DEI is used.
Otherwise, it is the index of a mapping profile. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.32 |
| erpPassthroughQueueBlockEast East queue block for passthrough VLANs.
The object points to an existing entry of rad.queueGroupTable.
zeroDotZero means the designated default queue block. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.33 |
| erpPassthroughQueueBlockWest West queue block for passthrough VLANs.
The object points to an existing entry of rad.queueGroupTable.
zeroDotZero means the designated default queue block. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.34 |
| erpNodeState This object indicates Node state of the Ethernet
Protection Ring.
init=initial state
idle=normal operation
protected=protection state. | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.4 |
| erpBridgeNum Bridge number the ERP ports belong to.
Default=1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.5 |
| erpEastPort ifIndex of the Bridge Port, that is the East Port
of the ERP. This Bridge Port belongs to erpBridgeNum.
Default=0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.6 |
| erpWestPort ifIndex of the Bridge Port, that is the West Port
of the ERP. This Bridge Port belongs to erpBridgeNum.
Default=0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.7 |
| erpRplPort This object is in use only in ERPv1 (not in use in ERPv2).
It indicates the Ring Port, that has the role of RPL.
notApplicable(1) if none of the ERP Ports serves as RPL
erpEastP… | column | Enumeration | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.8 |
| erpRapsVlanId VLAN ID used for Ring APS (RAPS) messages.
Valid values are: 1..4094.
Value must be different, for different erpIdx.
Default=0. | column | Unsigned32 | .1.3.6.1.4.1.164.3.1.6.1.4.2.1.1.9 |