prtGenTsIConPrt

This attribute indicates the internally (In Mux) 
connected port.
The valid port number depends on the IO slot no.,  the 
installed card type and the port type: outside, inside, 
SP.
* The outside ports will be the T1/E1 cards ports. 
  The convention used will be (for DXC):
  - first two digits will be: (IO slot number+10)
    for a stand-alone unit, the IO slot will be considered 1.
  - last one/two digits will be the port number within the 
    card, in odd numbers:
 port1 = 1
 port2 = 3
 port3 = 5 
 etc...
 Example: port2 of IO slot 11 will be: 213 .
* The inside ports will be for example, the HS cards ports. 
  The convention used will be (for DXC):
  - first two digits will be: (IO slot number+10)
    for a stand-alone unit, the IO slot will be considered 1.
  - last one/two digits will be the port number within the 
    card, in even numbers:
    port1 = 2
    port2 = 4
    port3 = 6 
    etc...
    Example: port2 of IO slot 11 will be: 214 .
* noConnection - will be indicated as 10 for DXC and FCD-E1/T1.
               - will be indicated as 100 for FCD-E1/I and SMODs.   
* Split TS (same TS is Split to several ports) - 11. 
	   * notApplicable- will be indicated as 100 for LRS IMODs.
              
All HS port's timeslots must have the same destination
port.

MIB

RAD-Dacs-MIB

OID

.1.3.6.1.4.1.164.3.3.3.1.3.1.5

Type

column

Access

readwrite

Status

current

Parent

prtGenTsEntry