prtGenTestCmdXP

This is an Expanded test command of the prtGenTestCmd object.
The prtGenTestCmd object reached its maximum, being an Integer with 31 bits.
Setting this object to a value as detailed furter on 
(except 0) will initiate a test on the specific port, 
if the operation is allowed (according to TestMaskXP). 
If the operation is not allowed, the mux will ignore the 
operation.
The test/s requested will be set according to the respective
bit:
  TEST                  BIT
 -----------            ---
 localLoop               1	=LSB
 remoteLoop              2
 bert                    3
 plb                     4
 inband                  5
              
 prbs                    8
 loop2-v54  (RLB)        9
 loop3-v54  (LLB)       10
              
 Tone injection         13
 Tx-plb                 14
 Tx-llb                 15
 DTE loop (HSSI)        16
              
 HDSL-Tx-Inband         20
 HDSL-Rx-Inband         21
		Monitor                22  (test port)
		User Line Loopback	   23
              
 Rem-Loop-on-Rem-Unit   25
		LBBD                   26
		LB1                    27
		LB2                    28
 BERT-on-Rem-Unit       29
		TS Remote Loop         30
		LLB-on-Rem-Unit        31
		Downstream-AIS         32
		Upstream-AIS           33
		Send-RDI               34 
		Test Per TS            35
              
 e.g : If the requested value is 00000003 hex  ->
       Bits 1 & 2 are set -> the requested tests are :
                                    local-loop
                                    remote-loop  
              
Setting this object to stop (value=0 ; all bits are 0), 
will stop all the user requested tests running on the 
selected port; it will NOT stop the tests initiated by 
the system.

MIB

RAD-Dacs-MIB

OID

.1.3.6.1.4.1.164.3.3.3.1.1.1.18

Type

column

Access

readwrite

Status

current

Parent

prtGenEntry