qtechPhySeparatedEnable
QTECH-WLAN-FIT-AP-IN-MIB ·
.1.3.6.1.4.1.27514.1.1.10.2.83.1.2
Object
scalar
r/w
Enumeration
virtual phy separated enable config ,0:off 1:on.
Context
- MIB
- QTECH-WLAN-FIT-AP-IN-MIB
- OID
.1.3.6.1.4.1.27514.1.1.10.2.83.1.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- qtechSystemInfoConfigObjects
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | off |
1 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qtechDomain The Product Domain. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.27514.1.1.10.2.83.1.1 |
| qtechAcAssociationFailureTotalTimes The total times the association fails on AC. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.10 |
| qtechAcAirIfRxTotalDataFrams The air interface total Rx Data Farms on AC. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.11 |
| qtechAcAirIfTxTotalDataFrams The air interface total Tx Data Farms on AC. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.12 |
| qtechAcAirIfTxTotalLostFrams The air interface total Tx Losted Data Farms on AC. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.13 |
| qtechAcAirIfTxAssociateFrams The air interface total Tx Associate Farms on AC. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.14 |
| qtechAcAirIfRxAssociateFrams The air interface total Rx Associate Farms on AC. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.15 |
| qtechAcAirIfBeaconTotalFrams The air interface total Beacon Farms on AC. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.16 |
| qtechAcAirIfRxTotalDataBytes The air interface total Rx right Data Bytes on AC. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.17 |
| qtechAcAirIfTxTotalDataBytes The air interface total Tx right Data Bytes on AC. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.18 |
| qtechAcAirRxFlux The air interface Uplink Flux on AC. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.19 |
| qtechAcAirTxFlux The air interface Downlink Flux on AC. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.20 |
| qtechForfendDosAttackEnable Forfend DOS Attack config ,0:off 1:on. | scalar | Enumeration | .1.3.6.1.4.1.27514.1.1.10.2.83.1.3 |
| qtechAcTrafficLoadBalancing AC Traffic Load Balancing enable. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.27514.1.1.10.2.83.1.4 |
| qtechAcTrafficLoadBalanceThreshold AC Traffic Load Balancing Threshold value . | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.5 |
| qtechAcTrafficOtherAPThresholdValue other AP Traffic Threshold value . | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.6 |
| qtechAcAPWIDSScanningMode config AP WIDS scanning mode ,
0: all channel scanning 1: auto select channel scanning . | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.7 |
| qtechAcAPLegitimateMode config AP Legitimate Mode value
0:legal ap 1: Illegal ap 2: Disturb AP . | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.8 |
| qtechAcAPTreatMode config Illegal AP Process mode 0:DOS attrack 1: disturb AP. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.27514.1.1.10.2.83.1.9 |