qosMeterDataSpecification
QOS-POLICY-IP-PIB ·
.1.3.6.1.4.1.45.4.2.1.2.1.1.2
Object
column
r/w
Enumeration
Specifies the metering data, and thus the actions, that
are defined in a given entry.
A value of noMeterData(1) indicates that no flow metering
is necessary. All flows associated with this meter entry
are considered to be at a high level of conformance.
A value of committedData(2) indicates that committed rate
and committed burst information has been specified and will
be applied to associated flows. No peak rate and burst
information has been specified meaning that two levels
of conformance (high, medium) are supported.
A value of peakData(3) indicates that peak rate and peak
burst information has been provided in addition to the
committed rate and committed burst information. All provided
information will be applied to associated flows meaning that
three levels of conformance (high, medium, low) are
supported.
A value of committedRestricted(4) indicates that committed
rate and committed burst information has been specified and
will be applied to associated flows. No peak rate and burst
information has been specified meaning that two levels of
conformance (high, medium) are supported. Furthermore, the
non-conformant (out-of-profile) action is derived from the
ntnQosConfigDefaultOutOfProfileAction attribute. The out-of-
profile action can not be specified via the meter or policy
entry.
Context
- MIB
- QOS-POLICY-IP-PIB
- OID
.1.3.6.1.4.1.45.4.2.1.2.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- qosMeterEntry
- Table
- qosMeterTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noMeterData |
2 | committedData |
3 | peakData |
4 | committedRestricted |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qosMeterId An arbitrary integer index that uniquely identifies
the instance of the qosMeter class. Meters are
associated with specific flows using this attribute
through the qosTargetMeter a… | column | POLICY-FRAMEWORK-PIBPolicyInstanceId | .1.3.6.1.4.1.45.4.2.1.2.1.1.1 |
| qosMeterStorageType The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.45.4.2.1.2.1.1.10 |
| qosMeterStatus The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.45.4.2.1.2.1.1.11 |
| qosMeterLabel A label used to reference the entry in a textual manner. | column | OctetString | .1.3.6.1.4.1.45.4.2.1.2.1.1.12 |
| qosMeterCommittedRate This object represents the committed information rate
(CIR) against which associated traffic streams will be
metered. The CIR specifies the rate at which incoming
traffic can arri… | column | Unsigned32 | .1.3.6.1.4.1.45.4.2.1.2.1.1.3 |
| qosMeterCommittedBurst This object represents the committed burst size
(CBS) against which associated traffic streams will
be metered. The CBS specifies the maximum burst size
that is supported for flow… | column | Unsigned32 | .1.3.6.1.4.1.45.4.2.1.2.1.1.4 |
| qosMeterPeakRate This object represents the peak information rate (PIR)
against which associated traffic streams will be
metered. The PIR specifies the rate at which incoming
traffic can arrive to… | column | Unsigned32 | .1.3.6.1.4.1.45.4.2.1.2.1.1.5 |
| qosMeterPeakBurst This object represents the peak burst size (PBS)
against which associated traffic streams will
be metered. The CBS specifies the maximum burst size
that is supported for flows to … | column | Unsigned32 | .1.3.6.1.4.1.45.4.2.1.2.1.1.6 |
| qosMeterHighConfAction This attribute identifies the action that is to be
initiated for flows that are determined to have a high
level of conformance with regard to metering criteria
being applied to th… | column | PolicyInstanceIdOrZero | .1.3.6.1.4.1.45.4.2.1.2.1.1.7 |
| qosMeterMedConfAction This attribute identifies the action that is to be
initiated for flows that are determined to have a medium
level of conformance with regard to metering criteria
being applied to … | column | PolicyInstanceIdOrZero | .1.3.6.1.4.1.45.4.2.1.2.1.1.8 |
| qosMeterLowConfAction This attribute identifies the action that is to be
initiated for flows that are determined to have a low
level of conformance with regard to metering criteria
being applied to the… | column | PolicyInstanceIdOrZero | .1.3.6.1.4.1.45.4.2.1.2.1.1.9 |