qosIpAceStatus
QOS-POLICY-IP-PIB ·
.1.3.6.1.4.1.45.4.2.2.1.1.1.14
Object
The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.
Context
- MIB
- QOS-POLICY-IP-PIB
- OID
.1.3.6.1.4.1.45.4.2.2.1.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- qosIpAceEntry
- Table
- qosIpAceTable
- Siblings
- 13
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qosIpAceId An integer index to uniquely identify this ACE among all the
ACEs. | column | POLICY-FRAMEWORK-PIBPolicyInstanceId | .1.3.6.1.4.1.45.4.2.2.1.1.1.1 |
| qosIpAceSrcL4PortMin The minimum value that the packet's layer 4 source port
number can have and match this ACE. The value of this
attribute must be less-than-or-equal-to the value of
the correspondin… | column | Integer32 | .1.3.6.1.4.1.45.4.2.2.1.1.1.10 |
| qosIpAceSrcL4PortMax The maximum value that the packet's layer 4 source port
number can have and match this ACE. The value of this
attribute must be greater-than-or-equal-to the value of
the correspon… | column | Integer32 | .1.3.6.1.4.1.45.4.2.2.1.1.1.11 |
| qosIpAcePermit If the packet matches this ACE and the value of this
attribute is true, then the matching process terminates
and the QoS associated with this ACE (indirectly through
the ACL) is a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.2.2.1.1.1.12 |
| qosIpAceStorageType The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.45.4.2.2.1.1.1.13 |
| qosIpAceDstAddr The IP address to match against the packet's destination IP
address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.45.4.2.2.1.1.1.2 |
| qosIpAceDstAddrMask A mask for the matching of the destination IP address.
A zero bit in the mask means that the corresponding bit in
the address always matches. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.45.4.2.2.1.1.1.3 |
| qosIpAceSrcAddr The IP address to match against the packet's source IP
address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.45.4.2.2.1.1.1.4 |
| qosIpAceSrcAddrMask A mask for the matching of the source IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.45.4.2.2.1.1.1.5 |
| qosIpAceDscp The value that the DSCP in the packet can have and
match this ACE. A value of -1 indicates that a specific
DSCP value has not been defined and thus all DSCP values
are considered … | column | Integer32 | .1.3.6.1.4.1.45.4.2.2.1.1.1.6 |
| qosIpAceProtocol The IP protocol to match against the packet's protocol.
A value of zero means match all. | column | Integer32 | .1.3.6.1.4.1.45.4.2.2.1.1.1.7 |
| qosIpAceDstL4PortMin The minimum value that the packet's layer 4 destination
port number can have and match this ACE. The value of
this attribute must be less-than-or-equal-to the value of
the corres… | column | Integer32 | .1.3.6.1.4.1.45.4.2.2.1.1.1.8 |
| qosIpAceDstL4PortMax The maximum value that the packet's layer 4 destination
port number can have and match this ACE. The value of
this attribute must be greater-than-or-equal-to the value
of the co… | column | Integer32 | .1.3.6.1.4.1.45.4.2.2.1.1.1.9 |