prtOutputMaxCapacity
Printer-MIB ·
.1.3.6.1.2.1.43.9.2.1.4
Object
column
r/w
Integer32
The maximum capacity of this output sub-unit in output sub- unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value essentially reflects claimed capacity. If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Control Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown.
Context
- MIB
- Printer-MIB
- OID
.1.3.6.1.2.1.43.9.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- prtOutputEntry
- Table
- prtOutputTable
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Object Constraints
range: -2-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtOutputIndex A unique value used by this printer to identify this output
sub-unit. Although these values may change due to a major
reconfiguration of the sub-unit (e.g., the addition of new
o… | column | Integer32 | .1.3.6.1.2.1.43.9.2.1.1 |
| prtOutputVersion The version of this output sub-unit. | column | OctetString | .1.3.6.1.2.1.43.9.2.1.10 |
| prtOutputSerialNumber The serial number assigned to this output sub-unit. | column | OctetString | .1.3.6.1.2.1.43.9.2.1.11 |
| prtOutputDescription A free-form text description of this output sub-unit in the
localization specified by prtGeneralCurrentLocalization. | column | PrtLocalizedDescriptionStringTC | .1.3.6.1.2.1.43.9.2.1.12 |
| prtOutputSecurity Indicates if this output sub-unit has some security associated
with it and if that security is enabled or not. | column | PresentOnOff | .1.3.6.1.2.1.43.9.2.1.13 |
| prtOutputDimUnit The unit of measurement for use in calculating and relaying
dimensional values for this output sub-unit. | column | PrtMediaUnitTC | .1.3.6.1.2.1.43.9.2.1.14 |
| prtOutputMaxDimFeedDir The maximum dimensions supported by this output sub-unit
for measurements taken parallel relative to the feed
direction associated with that sub-unit in output
sub-unit dimensiona… | column | Integer32 | .1.3.6.1.2.1.43.9.2.1.15 |
| prtOutputMaxDimXFeedDir The maximum dimensions supported by this output sub-unit
for measurements taken ninety degrees relative to the
feed direction associated with that sub-unit in output
sub-unit dime… | column | Integer32 | .1.3.6.1.2.1.43.9.2.1.16 |
| prtOutputMinDimFeedDir The minimum dimensions supported by this output sub-unit
for measurements taken parallel relative to the feed
direction associated with that sub-unit in output
sub-unit dimensiona… | column | Integer32 | .1.3.6.1.2.1.43.9.2.1.17 |
| prtOutputMinDimXFeedDir The minimum dimensions supported by this output sub-unit
for measurements taken ninety degrees relative to the
feed direction associated with that sub-unit in output
sub-unit dime… | column | Integer32 | .1.3.6.1.2.1.43.9.2.1.18 |
| prtOutputStackingOrder The current state of the stacking order for the
associated output sub-unit. 'FirstToLast' means
that as pages are output the front of the next page is
placed against the back of t… | column | PrtOutputStackingOrderTC | .1.3.6.1.2.1.43.9.2.1.19 |
| prtOutputType The type of technology supported by this output sub-unit. | column | IANA-PRINTER-MIBPrtOutputTypeTC | .1.3.6.1.2.1.43.9.2.1.2 |
| prtOutputPageDeliveryOrientation The reading surface that will be 'up' when pages are
delivered to the associated output sub-unit. Values are
faceUp and faceDown. (Note: interpretation of these
values is in gen… | column | PrtOutputPageDeliveryOrientationTC | .1.3.6.1.2.1.43.9.2.1.20 |
| prtOutputBursting This object indicates that the outputting sub-unit supports
bursting, and if so, whether the feature is enabled. Bursting
is the process by which continuous media is separated in… | column | PresentOnOff | .1.3.6.1.2.1.43.9.2.1.21 |
| prtOutputDecollating This object indicates that the output supports decollating,
and if so, whether the feature is enabled. Decollating is the
process by which the individual parts within a multi-par… | column | PresentOnOff | .1.3.6.1.2.1.43.9.2.1.22 |
| prtOutputPageCollated This object indicates that the output sub-unit supports page
collation, and if so, whether the feature is enabled. See RFC
3805 Appendix A, Glossary Of Terms, for definition of h… | column | PresentOnOff | .1.3.6.1.2.1.43.9.2.1.23 |
| prtOutputOffsetStacking This object indicates that the output supports offset
stacking,and if so, whether the feature is enabled. See RFC
3805 Appendix A, Glossary Of Terms, for how Offset Stacking is
… | column | PresentOnOff | .1.3.6.1.2.1.43.9.2.1.24 |
| prtOutputCapacityUnit The unit of measurement for use in calculating and relaying
capacity values for this output sub-unit. | column | PrtCapacityUnitTC | .1.3.6.1.2.1.43.9.2.1.3 |
| prtOutputRemainingCapacity The remaining capacity of the possible output sub-unit
capacity in output sub-unit capacity units
(PrtCapacityUnitTC)of this output sub-unit. If this output sub-
unit can reliabl… | column | Integer32 | .1.3.6.1.2.1.43.9.2.1.5 |
| prtOutputStatus The current status of this output sub-unit. | column | PrtSubUnitStatusTC | .1.3.6.1.2.1.43.9.2.1.6 |
| prtOutputName The name assigned to this output sub-unit. | column | OctetString | .1.3.6.1.2.1.43.9.2.1.7 |
| prtOutputVendorName The vendor name of this output sub-unit. | column | OctetString | .1.3.6.1.2.1.43.9.2.1.8 |
| prtOutputModel The model name assigned to this output sub-unit.
NOTE: The above description has been modified from RFC 1759
for clarification. | column | OctetString | .1.3.6.1.2.1.43.9.2.1.9 |