prtMarkerNorthMargin
Printer-MIB ·
.1.3.6.1.2.1.43.10.2.1.11
Object
column
Integer32
The margin, in units identified by prtMarkerAddressabilityUnit,
from the leading edge of the medium as the medium flows through
the marking engine with the side to be imaged facing the
observer. The leading edge is the North edge and the other
edges are defined by the normal compass layout of directions
with the compass facing the observer. Printing within the area
bounded by all four margins is guaranteed for all interpreters.
The value (-2) means unknown.
Context
- MIB
- Printer-MIB
- OID
.1.3.6.1.2.1.43.10.2.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- prtMarkerEntry
- Table
- prtMarkerTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: -2-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtMarkerIndex A unique value used by the printer to identify this marking
SubUnit. Although these values may change due to a major
reconfiguration of the device (e.g., the addition of new mark… | column | Integer32 | .1.3.6.1.2.1.43.10.2.1.1 |
| prtMarkerAddressabilityXFeedDir The maximum number of addressable marking positions in the
cross feed direction in 10000 units of measure specified by
prtMarkerAddressabilityUnit. A value of (-1) implies 'other… | column | Integer32 | .1.3.6.1.2.1.43.10.2.1.10 |
| prtMarkerSouthMargin The margin from the South edge (see prtMarkerNorthMargin) of
the medium in units identified by prtMarkerAddressabilityUnit.
Printing within the area bounded by all four margins … | column | Integer32 | .1.3.6.1.2.1.43.10.2.1.12 |
| prtMarkerWestMargin The margin from the West edge (see prtMarkerNorthMargin) of
the medium in units identified by prtMarkerAddressabilityUnit.
Printing within the area bounded by all four margins is
… | column | Integer32 | .1.3.6.1.2.1.43.10.2.1.13 |
| prtMarkerEastMargin The margin from the East edge (see prtMarkerNorthMargin) of
the medium in units identified by prtMarkerAddressabilityUnit.
Printing within the area bounded by all four margins is
… | column | Integer32 | .1.3.6.1.2.1.43.10.2.1.14 |
| prtMarkerStatus The current status of this marker sub-unit. | column | PrtSubUnitStatusTC | .1.3.6.1.2.1.43.10.2.1.15 |
| prtMarkerMarkTech The type of marking technology used for this marking
sub-unit. | column | IANA-PRINTER-MIBPrtMarkerMarkTechTC | .1.3.6.1.2.1.43.10.2.1.2 |
| prtMarkerCounterUnit The unit that will be used by the printer when reporting
counter values for this marking sub-unit. The time units of
measure are provided for a device like a strip recorder that
… | column | PrtMarkerCounterUnitTC | .1.3.6.1.2.1.43.10.2.1.3 |
| prtMarkerLifeCount The count of the number of units of measure counted during the
life of printer using units of measure as specified by
prtMarkerCounterUnit.
Note: Thi… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.43.10.2.1.4 |
| prtMarkerPowerOnCount The count of the number of units of measure counted since the
equipment was most recently powered on using units of measure
as specified by prtMarkerCounterUnit. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.43.10.2.1.5 |
| prtMarkerProcessColorants The number of process colors supported by this marker. A
process color of 1 implies monochrome. The value of this
object and prtMarkerSpotColorants cannot both be 0. The value
… | column | Integer32 | .1.3.6.1.2.1.43.10.2.1.6 |
| prtMarkerSpotColorants The number of spot colors supported by this marker. The value
of this object and prtMarkerProcessColorants cannot both be 0.
Must be 0 or greater.
NOTE: The above … | column | Integer32 | .1.3.6.1.2.1.43.10.2.1.7 |
| prtMarkerAddressabilityUnit The unit of measure of distances, as applied to the marker's
resolution.
NOTE: The above description has been modified from RFC 1759
for clarification. | column | PrtMarkerAddressabilityUnitTC | .1.3.6.1.2.1.43.10.2.1.8 |
| prtMarkerAddressabilityFeedDir The maximum number of addressable marking positions in the
feed direction per 10000 units of measure specified by
prtMarkerAddressabilityUnit. A value of (-1) implies 'other'
or … | column | Integer32 | .1.3.6.1.2.1.43.10.2.1.9 |