prtGeneralConfigChanges

Printer-MIB · .1.3.6.1.2.1.43.5.1.1.1
MIB view Table view

Object

column SNMPv2-SMICounter32 
Counts configuration changes within the printer. A
configuration change is defined to be an action that results in
a change to any MIB object other than those that reflect status
or level, or those that act as counters or gauges. In addition,
any action that results in a row being added or deleted from
any table in the Printer MIB is considered a configuration
change. Such changes will often affect the capability of the
printer to service certain types of print jobs. Management
applications may cache infrequently changed configuration
information about sub units within the printer. This object
should be incremented whenever the agent wishes to notify
management applications that any cached configuration
information for this device is to be considered 'stale'. At
this point, the management application should flush any
configuration information cached about this device and fetch
              
new configuration information.
              
The following are examples of actions that would cause the
prtGeneralConfigChanges object to be incremented:
              
- Adding an output bin
- Changing the media in a sensing input tray
- Changing the value of prtInputMediaType
              
Note that the prtGeneralConfigChanges counter would not be
incremented when an input tray is temporarily removed to load
additional paper or when the level of an input device changes.
              
NOTE: The above description has been modified from RFC 1759
for clarification.

Context

MIB
Printer-MIB
OID
.1.3.6.1.2.1.43.5.1.1.1
Type
column
Access
readonly
Status
current
Parent
prtGeneralEntry
Table
prtGeneralTable
Siblings
18

Syntax

SNMPv2-SMICounter32
Source
SNMPv2-SMICounter32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
prtConsoleLocalization
The value of the prtLocalizationIndex corresponding to the language, country, and character set to be used for the console. This localization applies both to the actual display o…
columnInteger32.1.3.6.1.2.1.43.5.1.1.10
prtConsoleNumberOfDisplayLines
The number of lines on the printer's physical display. This value is 0 if there are no lines on the physical display or if there is no physical display
columnInteger32.1.3.6.1.2.1.43.5.1.1.11
prtConsoleNumberOfDisplayChars
The number of characters per line displayed on the physical display. This value is 0 if there are no lines on the physical display or if there is no physical displ…
columnInteger32.1.3.6.1.2.1.43.5.1.1.12
prtConsoleDisable
This value indicates how input is (or is not) accepted from the operator console. NOTE: The above description has been modified from RFC 1759 for clarification.
columnIANA-PRINTER-MIBPrtConsoleDisableTC.1.3.6.1.2.1.43.5.1.1.13
prtAuxiliarySheetStartupPage
Used to enable or disable printing a startup page. If enabled, a startup page will be printed shortly after power-up, when the device is ready. Typical startup pages include tes…
columnPresentOnOff.1.3.6.1.2.1.43.5.1.1.14
prtAuxiliarySheetBannerPage
Used to enable or disable printing banner pages at the beginning of jobs. This is a master switch which applies to all jobs, regardless of interpreter.
columnPresentOnOff.1.3.6.1.2.1.43.5.1.1.15
prtGeneralPrinterName
An administrator-specified name for this printer. Depending upon implementation of this printer, the value of this object may or may not be same as the value for the MIB-II 'SysN…
columnOctetString.1.3.6.1.2.1.43.5.1.1.16
prtGeneralSerialNumber
A recorded serial number for this device that indexes some type device catalog or inventory. This value is usually set by the device manufacturer but the MIB supports the option …
columnOctetString.1.3.6.1.2.1.43.5.1.1.17
prtAlertCriticalEvents
A running counter of the number of critical alert events that have been recorded in the alert table. The value of this object is RESET in the event of a power cycle operation (i.…
columnSNMPv2-SMICounter32.1.3.6.1.2.1.43.5.1.1.18
prtAlertAllEvents
A running counter of the total number of alert event entries (critical and non-critical) that have been recorded in the alert table
columnSNMPv2-SMICounter32.1.3.6.1.2.1.43.5.1.1.19
prtGeneralCurrentLocalization
The value of the prtLocalizationIndex corresponding to the current language, country, and character set to be used for localized string values that are identified as being depende…
columnInteger32.1.3.6.1.2.1.43.5.1.1.2
prtGeneralReset
Setting this value to 'powerCycleReset', 'resetToNVRAM', or 'resetToFactoryDefaults' will result in the resetting of the printer. When read, this object will always have the valu…
columnIANA-PRINTER-MIBPrtGeneralResetTC.1.3.6.1.2.1.43.5.1.1.3
prtGeneralCurrentOperator
The name of the person who is responsible for operating this printer. It is suggested that this string include information that would enable other humans to reach the operator, s…
columnOctetString.1.3.6.1.2.1.43.5.1.1.4
prtGeneralServicePerson
The name of the person responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the service person, su…
columnOctetString.1.3.6.1.2.1.43.5.1.1.5
prtInputDefaultIndex
The value of prtInputIndex corresponding to the default input sub-unit: that is, this object selects the default source of input media.
columnInteger32.1.3.6.1.2.1.43.5.1.1.6
prtOutputDefaultIndex
The value of prtOutputIndex corresponding to the default output sub-unit; that is, this object selects the default output destination.
columnInteger32.1.3.6.1.2.1.43.5.1.1.7
prtMarkerDefaultIndex
The value of prtMarkerIndex corresponding to the default marker sub-unit; that is, this object selects the default marker.
columnInteger32.1.3.6.1.2.1.43.5.1.1.8
prtMediaPathDefaultIndex
The value of prtMediaPathIndex corresponding to the default media path; that is, the selection of the default media path.
columnInteger32.1.3.6.1.2.1.43.5.1.1.9