prtAlertAllEvents
Printer-MIB ·
.1.3.6.1.2.1.43.5.1.1.19
Object
column
SNMPv2-SMICounter32
A running counter of the total number of alert event entries (critical and non-critical) that have been recorded in the alert table
Context
- MIB
- Printer-MIB
- OID
.1.3.6.1.2.1.43.5.1.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- prtGeneralEntry
- Table
- prtGeneralTable
- Siblings
- 18
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| prtGeneralConfigChanges Counts configuration changes within the printer. A
configuration change is defined to be an action that results in
a change to any MIB object other than those that reflect status
… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.43.5.1.1.1 |
| prtConsoleLocalization The value of the prtLocalizationIndex corresponding to
the language, country, and character set to be used for the
console. This localization applies both to the actual display
o… | column | Integer32 | .1.3.6.1.2.1.43.5.1.1.10 |
| prtConsoleNumberOfDisplayLines The number of lines on the printer's physical
display. This value is 0 if there are no lines on the
physical display or if there is no physical display | column | Integer32 | .1.3.6.1.2.1.43.5.1.1.11 |
| prtConsoleNumberOfDisplayChars The number of characters per line displayed on the physical
display. This value is 0 if there are no lines on the physical
display or if there is no physical displ… | column | Integer32 | .1.3.6.1.2.1.43.5.1.1.12 |
| prtConsoleDisable This value indicates how input is (or is not) accepted from
the operator console.
NOTE: The above description has been modified from RFC 1759
for clarification. | column | IANA-PRINTER-MIBPrtConsoleDisableTC | .1.3.6.1.2.1.43.5.1.1.13 |
| prtAuxiliarySheetStartupPage Used to enable or disable printing a startup page. If enabled,
a startup page will be printed shortly after power-up, when the
device is ready. Typical startup pages include tes… | column | PresentOnOff | .1.3.6.1.2.1.43.5.1.1.14 |
| prtAuxiliarySheetBannerPage Used to enable or disable printing banner pages at the
beginning of jobs. This is a master switch which applies to all
jobs, regardless of interpreter. | column | PresentOnOff | .1.3.6.1.2.1.43.5.1.1.15 |
| prtGeneralPrinterName An administrator-specified name for this printer. Depending
upon implementation of this printer, the value of this object
may or may not be same as the value for the MIB-II 'SysN… | column | OctetString | .1.3.6.1.2.1.43.5.1.1.16 |
| prtGeneralSerialNumber A recorded serial number for this device that indexes some
type device catalog or inventory. This value is usually set by
the device manufacturer but the MIB supports the option … | column | OctetString | .1.3.6.1.2.1.43.5.1.1.17 |
| prtAlertCriticalEvents A running counter of the number of critical alert events that
have been recorded in the alert table. The value of this object
is RESET in the event of a power cycle operation (i.… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.43.5.1.1.18 |
| prtGeneralCurrentLocalization The value of the prtLocalizationIndex corresponding to the
current language, country, and character set to be used for
localized string values that are identified as being depende… | column | Integer32 | .1.3.6.1.2.1.43.5.1.1.2 |
| prtGeneralReset Setting this value to 'powerCycleReset', 'resetToNVRAM', or
'resetToFactoryDefaults' will result in the resetting of the
printer. When read, this object will always have the valu… | column | IANA-PRINTER-MIBPrtGeneralResetTC | .1.3.6.1.2.1.43.5.1.1.3 |
| prtGeneralCurrentOperator The name of the person who is responsible for operating
this printer. It is suggested that this string include
information that would enable other humans to reach the
operator, s… | column | OctetString | .1.3.6.1.2.1.43.5.1.1.4 |
| prtGeneralServicePerson The name of the person responsible for servicing this
printer. It is suggested that this string include
information that would enable other humans to reach the
service person, su… | column | OctetString | .1.3.6.1.2.1.43.5.1.1.5 |
| prtInputDefaultIndex The value of prtInputIndex corresponding to the default input
sub-unit: that is, this object selects the default source of
input media. | column | Integer32 | .1.3.6.1.2.1.43.5.1.1.6 |
| prtOutputDefaultIndex The value of prtOutputIndex corresponding to the default
output sub-unit; that is, this object selects the default
output destination. | column | Integer32 | .1.3.6.1.2.1.43.5.1.1.7 |
| prtMarkerDefaultIndex The value of prtMarkerIndex corresponding to the
default marker sub-unit; that is, this object selects the
default marker. | column | Integer32 | .1.3.6.1.2.1.43.5.1.1.8 |
| prtMediaPathDefaultIndex The value of prtMediaPathIndex corresponding to
the default media path; that is, the selection of the
default media path. | column | Integer32 | .1.3.6.1.2.1.43.5.1.1.9 |