pwTDMCfgStorageType

PW-TDM-MIB · .1.3.6.1.2.1.186.1.3.1.19

Object

column r/w SNMPv2-TCStorageType

This variable indicates the storage type for this
row.  Conceptual rows having the value permanent(4) must
allow write-access to all columnar objects.

Context

MIB: PW-TDM-MIB
OID: .1.3.6.1.2.1.186.1.3.1.19
Type: column
Access: readwrite
Status: current
Parent: pwTDMCfgEntry
Table: pwTDMCfgTable
Siblings: 19

Syntax

SNMPv2-TCStorageType

Source: SNMPv2-TCStorageType
Base type: Enumeration

Values & Constraints

Type Values

`1`	other
`2`	volatile
`3`	nonVolatile
`4`	permanent
`5`	readOnly

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pwTDMCfgIndex Index to an entry in this table. When an NMS creates a new entry/row in this table, it best makes use of the value of the pwTDMCfgIndexNext object in order to find a free or avai…	column	PwTDMCfgIndex	`.1.3.6.1.2.1.186.1.3.1.1`
pwTDMCfgConsecMissPktsOutSynch The number of consecutive missing packets that are required to enter the LOPS. Object MAY be changed only when the related PW is defined as not active.	column	Unsigned32	`.1.3.6.1.2.1.186.1.3.1.10`
pwTDMCfgSetUp2SynchTimeOut The amount of time the host should wait before declaring the pseudowire in a down state, if the number of consecutive TDM packets that have been received after changing the admini…	column	millisecond SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.186.1.3.1.11`
pwTDMCfgPktReplacePolicy This parameter determines the value to be played when CE bound packets over/underflow the jitter buffer, or are missing for any reason. This byte pattern is sent (played) on the …	column	Enumeration	`.1.3.6.1.2.1.186.1.3.1.12`
pwTDMCfgAvePktLossTimeWindow The length of time over which the average packet loss rate should be computed to detect excessive packet loss rate. Object MAY be changed only when the related PW is defined as no…	column	millisecond SNMPv2-SMIInteger32	`.1.3.6.1.2.1.186.1.3.1.13`
pwTDMCfgExcessivePktLossThreshold Excessive packet loss rate is detected by computing the average packet-loss rate over a pwTDMCfgAvePktLossTimeWindow amount of time and comparing it with this threshold value. The…	column	Percent SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.186.1.3.1.14`
pwTDMCfgAlarmThreshold Alarms are only reported when the defect state persists for the length of time specified by this object. Object MAY be changed only when the related PW is defined as not active.	column	milisec SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.186.1.3.1.15`
pwTDMCfgClearAlarmThreshold Alarm MUST be cleared after the corresponding defect is undetected for the amount of time specified by this object. Object MAY be changed only when the related PW is defined as no…	column	milisec SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.186.1.3.1.16`
pwTDMCfgMissingPktsToSes Percent of missing packets detected (consecutive or not) within a 1-second window to cause a Severely Error Second (SES) to be counted. Object MAY be changed only when the related…	column	Percent SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.186.1.3.1.17`
pwTDMCfgTimestampMode Timestamp generation MAY be used in one of the following modes: 1. Absolute mode: The PSN-bound IWF sets timestamps using the clock recovered from the incoming TDM attachment ci…	column	Enumeration	`.1.3.6.1.2.1.186.1.3.1.18`
pwTDMCfgRowStatus Object used for creating, modifying, and deleting a row from this table. The following objects cannot be modified if the entry is in use and the status is active: pwTDMCfgPayload…	column	SNMPv2-TCRowStatus	`.1.3.6.1.2.1.186.1.3.1.2`
pwTDMCfgPktFiller Filler byte pattern played out on the TDM interface if pwTDMCfgPktReplacePolicy was set to filler(3). Object MAY be changed only when the related PW is defined as not active.	column	Unsigned32	`.1.3.6.1.2.1.186.1.3.1.20`
pwTDMCfgName A descriptive string, preferably a unique name, to an entry in this table. Object MAY be changed at any time.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.2.1.186.1.3.1.21`
pwTDMCfgPayloadSize The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amount of bytes. Upon R…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.186.1.3.1.4`
pwTDMCfgPktReorder If set to True: as CE-bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence number differential (i.e., the range in which re-se…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.186.1.3.1.5`
pwTDMCfgRtpHdrUsed If set to False: an RTP header is not pre-pended to the TDM packet.	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.186.1.3.1.6`
pwTDMCfgJtrBfrDepth The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configured to a value not supported by th…	column	microsecond SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.186.1.3.1.7`
pwTDMCfgPayloadSuppression Selecting 'enable' means: Payload suppression is allowed. Payload MAY be omitted in order to conserve bandwidth. Selecting 'disable' means: No suppression under any condition. Obj…	column	Enumeration	`.1.3.6.1.2.1.186.1.3.1.8`
pwTDMCfgConsecPktsInSynch The number of consecutive packets with sequential sequence numbers that are required to exit the LOPS. Object MAY be changed only when the related PW is defined as not active.	column	Unsigned32	`.1.3.6.1.2.1.186.1.3.1.9`