reliabilityErrorLogId

PDU2-MIB · .1.3.6.1.4.1.13742.6.10.2.2.1.2

Object

Unique ID of the entry.
POH
    Power on hours.
              
CB.<label>.TRIPCNT
   Trip count of circuit breaker with label <label>.
              
CTRL.<serial>.<addr>.MAIN.CSUMERRLASTHOUR
   Number of checksum errors in sub (controller board) to main (CPU
   board) communication in the last hour on controller with serial
   number <serial> and bus address <addr>.
              
CTRL.<serial>.<addr>.SUB.CSUMERRLASTHOUR
  Number of checksum errors in main (CPU board) to sub (controller
  board) communication in the last hour on controller with serial
  number <serial> and bus address <addr>.
              
CTRL.<serial>.<addr>.TOUTLASTHOUR
  Number of communication timeouts to controller with serial
  number <serial> and bus address <addr> in the last hour.
              
CTRL.<serial>.<addr>.RLY.<num>.CYCLECNT
  Number of cycles the relay <num> on the controller board with serial
  number <serial> and bus address <addr> has made. A cycle is an
  off->on followed by an on->off event later. The count is increased on
  the off->on transition.
              
CTRL.<serial>.<addr>.RLY.<num>.FAILLASTHOUR
  Number of failed switching operations on relay <num> on the controller
  board with serial number <serial> and bus address <addr> in the last
  hour. It depends on the specific controller board hardware  and what
  error conditions are detected.

Context

MIB
PDU2-MIB
OID
.1.3.6.1.4.1.13742.6.10.2.2.1.2
Type
column
Access
readonly
Status
current
Parent
reliabilityErrorLogEntry
Groups
1

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDU2-MIB' -M '/opt/observium/mibs/raritan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDU2-MIB::reliabilityErrorLogId'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'PDU2-MIB' -M '/opt/observium/mibs/raritan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDU2-MIB::reliabilityErrorLogId.<reliabilityErrorLogIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'PDU2-MIB' -M '/opt/observium/mibs/raritan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PDU2-MIB::reliabilityErrorLogId'

Syntax

Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255

Conformance