pvxERPSSrvcMultipleFailure

This object is configured in interconnection node of the sub-ring to
support the feature 'Minimizing segmentation in interconnected rings'
as per Appendix X of ITU-T G.8032/Y.1344 (03/2010) standard.
              
Configured value of vxERPSSrvcMultipleFailure is used in Block Indication Logic Procedure
as per Section X.3.2 in Appendix X of ITU-T G.8032/Y.1344 (03/2010) standard.
Interconnected rings as described below :
 a) If Loss of connectivity between the interconnection nodes is detected
    and if the object pvxERPSSrvcMultipleFailure is configured as primary
    then Local MS command is applied on the subring port else loss of connectivity
    between the interconnection nodes is ignored.
 b) Similarly when loss of connectivity between the interconnection nodes
    is recovered and if the object pvxERPSSrvcInterconnectedNode is primary
    then Local MS command on the subring port is cleared else recovery of 
    connectivity between the interconnection nodes is ignored.
              
This object is effective only when ring node is interconnection node.  The default
value is disabled (1).  This object is applicable only when the compatible version is 2.

MIB

PACKET-VX-BRIDGE-MIB

OID

.1.3.6.1.4.1.18070.2.2.1.14.2.25.1.20

Type

column

Access

readwrite

Status

current

Default

disabled

Parent

pvxERPSServiceEntry