osSyncET1CableType
OS-SYNCE-MIB ·
.1.3.6.1.4.1.6926.2.23.1.2.2.2
Object
scalar r/w
Enumeration
osSyncET1CableType applies both to a ds1 port
configured with a short buildout (1-6) and for long buildout (7-9).
Short buildout is bescribed bythe length of the line (in feet).
For line lengths longer than 655 feet the ds1 buildout is long.
Long buildout is described in decibels(dB) the transmission signal
decreases over the line.
For long buildout the following values are valid:
lboNeg7p5dB - For -7.5 dB
lboNeg15p0dB - For -15.0 dB
lboNeg22p5dB - For -22.5 dB
For short buildout the following values are valid:
length0To133 - For line length from 0 to 133 feet (0.0dB)
length134To266 - For line length from 134 to 266 feet (0.5dB)
length267To399 - For line length from 267 to 399 feet (0.8dB)
length400To533 - For line length from 400 to 533 feet (1.1dB)
length534To655 - For line length from 534 to 655 feet (1.5dB)
Context
- MIB
- OS-SYNCE-MIB
- OID
.1.3.6.1.4.1.6926.2.23.1.2.2.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- osSyncEMIBCfgGen
- Groups
- 1
Net-SNMP examples
How SNMP and these commands workScalars have one instance, identified by the .0 suffix.
Read the scalar instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'OS-SYNCE-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'OS-SYNCE-MIB::osSyncET1CableType.0'
More examples
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'OS-SYNCE-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'OS-SYNCE-MIB::osSyncET1CableType'
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | lengthNotApplicable |
1 | length0To133 |
2 | length134To266 |
3 | length267To399 |
4 | length400To533 |
5 | length534To655 |
6 | lboNeg7p5dB |
7 | lboNeg15p0dB |
8 | lboNeg22p5dB |
Conformance
Member of