deviceBaseQosPolicyDeviceIndex – NSCRTV-EPON-QOS-MGM-MIB

Object

column NSCRTV-EPONEOC-EPON-MIBEponDeviceIndex

Device index        
For OLT - Set to corresponding device/slot/port
For ONU - Set to 0

Context

MIB: NSCRTV-EPON-QOS-MGM-MIB
OID: .1.3.6.1.4.1.17409.2.3.8.3.1.1
Type: column
Access: noaccess
Status: current
Parent: deviceBaseQosPolicyEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NSCRTV-EPON-QOS-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-QOS-MGM-MIB::deviceBaseQosPolicyDeviceIndex'

More examples

Read one indexed instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'NSCRTV-EPON-QOS-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NSCRTV-EPON-QOS-MGM-MIB::deviceBaseQosPolicyDeviceIndex.<deviceBaseQosPolicyDeviceIndex>'

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'NSCRTV-EPON-QOS-MGM-MIB' -M '/opt/observium/mibs/fscom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'NSCRTV-EPON-QOS-MGM-MIB::deviceBaseQosPolicyDeviceIndex'

Syntax

NSCRTV-EPONEOC-EPON-MIBEponDeviceIndex

Source: NSCRTV-EPONEOC-EPON-MIBEponDeviceIndex
Base type: Unsigned32

Type Description

Epon olt/onu?豸?????š?       
ONU ID????ɣ?4?ֽڣ?????--?ͣ?          
Olt device-8bit OLT Card-8bit Pon port-8bit OnuNUM-8bit        
Note: 
----        
1. OLT device must not be 0.        
2. Card here shall confirm the last byte definition of EponCardIndex
   to indicate the main-slot and sub-slot index.         
3. Pon port must not be 0.
4. The useful ONU logical ID MUST never be set to 0, where NUM of 0 has
   another meaning, to indicate that the ONU logical ID is meaningless,
   or said to not applied.
                  
Usage guide:
-----------        
This TC could be used for OLT SNI, OLT PON port, OLT ONU ID
ONU UNI, OLT device, trunk.         
If the refered MIB object does not have clear definition,
refer to the following:
Applied Obj  - Descriptions of Index
------------------------------------------------------------------
OLT Pon Port - OnuNum shall be set to 0,
OLT SNI    - Same as OLT Pon Port         
OLT onu ID   - Set OnuNUM to corresponding ONU logical ID         
ONU UNI    - Same as OLT ONU ID
OLT device   - Set card, pon port and OnuNUM to 0
Trunk    - Card to 0x3F, pon port to trunk ID, OnuNUM to 0
         Olt device to corresponding ONU device

Values & Constraints

No enumerated values or constraints recorded.