dot3adAggActorSystemID
NMS-IEEE8023-LAG-MIB ·
.1.3.6.1.4.1.3320.2.232.1.1.1.1.4
Object
column
SNMPv2-TCMacAddress
A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).
Context
- MIB
- NMS-IEEE8023-LAG-MIB
- OID
.1.3.6.1.4.1.3320.2.232.1.1.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dot3adAggEntry
- Table
- dot3adAggTable
- Siblings
- 14
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot3adAggIndex The unique identifier allocated to this Aggregator by
the local System. This attribute identifies an
Aggregator instance among the subordinate managed
objects of the containing o… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.3320.2.232.1.1.1.1.1 |
| dot3adAggPartnerOperKey The current operational value of the Key for the
Aggregator's current protocol Partner. This is a 16-bit
read-only value. If the aggregation is manually
configured, this Key value… | column | LacpKey | .1.3.6.1.4.1.3320.2.232.1.1.1.1.10 |
| dot3adAggCollectorMaxDelay The value of this 16-bit read-write attribute defines
the maximum delay, in tens of microseconds, that may be
imposed by the Frame Collector between receiving a frame
from an Aggr… | column | Integer32 | .1.3.6.1.4.1.3320.2.232.1.1.1.1.11 |
| dot3adAggIfIndex The interface index of this Aggregator. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.3320.2.232.1.1.1.1.12 |
| dot3adAggAdminMode The default aggregation control mode of this Aggregator. | column | LagMode | .1.3.6.1.4.1.3320.2.232.1.1.1.1.13 |
| dot3adAggOperMode The running aggregation control mode of this Aggregator. | column | LagMode | .1.3.6.1.4.1.3320.2.232.1.1.1.1.14 |
| dot3adAggRowStatus This object indicates the status of this entry.
Set this value to 'createAndGo' to create a new aggregator. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3320.2.232.1.1.1.1.15 |
| dot3adAggMACAddress A 6-octet read-only value carrying the individual
MAC address assigned to the Aggregator. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3320.2.232.1.1.1.1.2 |
| dot3adAggActorSystemPriority A 2-octet read-write value indicating the priority
value associated with the Actor's System ID. | column | Integer32 | .1.3.6.1.4.1.3320.2.232.1.1.1.1.3 |
| dot3adAggAggregateOrIndividual A read-only Boolean value indicating whether the
Aggregator represents an Aggregate (`TRUE') or
an Individual link (`FALSE'). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3320.2.232.1.1.1.1.5 |
| dot3adAggActorAdminKey The current administrative value of the Key for the
Aggregator. The administrative Key value may differ from
the operational Key value for the reasons discussed in
43.6.2. This is… | column | LacpKey | .1.3.6.1.4.1.3320.2.232.1.1.1.1.6 |
| dot3adAggActorOperKey The current operational value of the Key for the
Aggregator. The administrative Key value may differ from
the operational Key value for the reasons discussed in
43.6.2. This is a… | column | LacpKey | .1.3.6.1.4.1.3320.2.232.1.1.1.1.7 |
| dot3adAggPartnerSystemID A 6-octet read-only MAC address value consisting of the
unique identifier for the current protocol Partner of
this Aggregator. A value of zero indicates that there is
no known Par… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3320.2.232.1.1.1.1.8 |
| dot3adAggPartnerSystemPriority A 2-octet read-only value that indicates the priority
value associated with the Partner's System ID. If the
aggregation is manually configured, this System Priority
value will be … | column | Integer32 | .1.3.6.1.4.1.3320.2.232.1.1.1.1.9 |