agentSwitchIPAddressConfigMethod

NETGEAR-ROUTING-MIB · .1.3.6.1.4.1.4526.10.2.2.3.1.2
MIB view Table view

Object

column r/w Enumeration 
The Source of the IP Address. User can set the object to none(0) or dhcp(2).
Option dhcp(2) enables Dhcp Client on the interface.
Option none(0) disables Dhcp Client on the interface.
Get on this object returns manual(1) only when the interface has a manually configured address.

Context

MIB
NETGEAR-ROUTING-MIB
OID
.1.3.6.1.4.1.4526.10.2.2.3.1.2
Type
column
Access
readwrite
Status
current
Parent
agentSwitchIpInterfaceEntry
Table
agentSwitchIpInterfaceTable
Siblings
18

Syntax

Enumeration

Values & Constraints

Enumerated Values
0none
1manual
2dhcp

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
agentSwitchIpInterfaceIfIndex
The IfIndex associated with this instance.
columnInteger32.1.3.6.1.4.1.4526.10.2.2.3.1.1
agentSwitchIpInterfaceUnnumberedIfIndex
If this object is non-zero, it indicates that the interface is unnumbered, and specifies which interface the address is borrowed from.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.4526.10.2.2.3.1.10
agentSwitchIpInterfaceIcmpUnreachables
If this object is enable, it indicates that ICMP unreachables can be sent on this interface.
columnEnumeration.1.3.6.1.4.1.4526.10.2.2.3.1.11
agentSwitchIpInterfaceIcmpRedirects
If this object is enable and agentSwitchIpIcmpRedirectsMode is also enable ICMP Redirects can be sent on this interface.
columnEnumeration.1.3.6.1.4.1.4526.10.2.2.3.1.12
agentSwitchDhcpOperation
Renew or Release the IP Address learned through DHCP. Get on this object always gives none. none means no operation is performed on dhcp.
columnEnumeration.1.3.6.1.4.1.4526.10.2.2.3.1.13
agentSwitchIpInterfaceSuppressed
This mib variable contains the following values, which has the meaning as: 'unsuppressed' - The interface is not suppressed 'suppressed' - The interface is suppressed
columnEnumeration.1.3.6.1.4.1.4526.10.2.2.3.1.14
agentSwitchIpInterfaceNumberOfFlaps
This mib variable displays the number of flaps occurred on the interface
columnUnsigned32.1.3.6.1.4.1.4526.10.2.2.3.1.15
agentSwitchIpInterfaceCurrentPenalty
This mib variable displays the current penalty of an interface
columnUnsigned32.1.3.6.1.4.1.4526.10.2.2.3.1.16
agentSwitchIpInterfaceReUseTime
This mib variable displays the number of seconds until the interface is allowed to come up
columnUnsigned32.1.3.6.1.4.1.4526.10.2.2.3.1.17
agentSwitchIpInterfaceAutoStateMode
Enables or disables auto-state for this interface. This mode applies to VLAN routing interfaces only.
columnEnumeration.1.3.6.1.4.1.4526.10.2.2.3.1.18
agentSwitchIpInterfaceFptiName
A textual string containing the name of a FPTI Instance.
columnOctetString.1.3.6.1.4.1.4526.10.2.2.3.1.19
agentSwitchIpInterfaceIpAddress
The IpAddress assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceNetMask must be set at the same time.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4526.10.2.2.3.1.3
agentSwitchIpInterfaceNetMask
The NetMask assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceIpAddress must be set at the same time.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4526.10.2.2.3.1.4
agentSwitchIpInterfaceClearIp
Sets the interfaces IpAddress and NetMask back to 0.0.0.0
columnEnumeration.1.3.6.1.4.1.4526.10.2.2.3.1.5
agentSwitchIpInterfaceRoutingMode
Enables or disables routing for this interface.
columnEnumeration.1.3.6.1.4.1.4526.10.2.2.3.1.6
agentSwitchIpInterfaceProxyARPMode
Enables or disables Proxy ARP for this interface.
columnEnumeration.1.3.6.1.4.1.4526.10.2.2.3.1.7
agentSwitchIpInterfaceMtuValue
Configures the MTU value for this interface. The applicable range is 68 to the <interface MTU value - 18>, in bytes. Get of this object returns the effective MTU value on the in…
columnUnsigned32.1.3.6.1.4.1.4526.10.2.2.3.1.8
agentSwitchIpInterfaceBandwidth
Configures the Bandwidth value for this interface. If the value returned is 0 bandwidth for this interface is not Configured.
columnUnsigned32.1.3.6.1.4.1.4526.10.2.2.3.1.9