agentRouterOspfRFC1583CompatibilityMode

NETGEAR-ROUTING-MIB · .1.3.6.1.4.1.4526.10.2.4.11
MIB view Table view

Object

scalar r/w Enumeration 
From RFC2328: 
Controls the preference rules used in Section 16.4 when
choosing among multiple AS-external-LSAs advertising the
same destination. When set to 'enabled', the preference
rules remain those specified by RFC 1583 ([Ref9]). When set
to 'disabled', the preference rules are those stated in
          
Section 16.4.1, which prevent routing loops when AS-
external-LSAs for the same destination have been originated
from different areas. Set to 'enabled' by default.
          
In order to minimize the chance of routing loops, all OSPF
routers in an OSPF routing domain should have
RFC1583Compatibility set identically. When there are routers
present that have not been updated with the functionality
specified in Section 16.4.1 of this memo, all routers should
have RFC1583Compatibility set to 'enabled'. Otherwise, all
routers should have RFC1583Compatibility set to 'disabled',
preventing all routing loops.

Context

MIB
NETGEAR-ROUTING-MIB
OID
.1.3.6.1.4.1.4526.10.2.4.11
Type
scalar
Access
readwrite
Status
current
Parent
agentRouterOspfConfigGroup
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
1enable
2disable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
agentOspfDefaultMetric
Default metric of redistributed routes, when OSPF redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not be set. Valid rang…
scalarInteger32.1.3.6.1.4.1.4526.10.2.4.1
agentOspfVirtIfTable
Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.
table-.1.3.6.1.4.1.4526.10.2.4.10
agentOspfSpfDelayTime
Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default time is 5 seconds. A …
scalarSpfTimerRange.1.3.6.1.4.1.4526.10.2.4.12
agentOspfSpfHoldTime
Minimum time (in seconds) between two consecutive SPF calculations. It can be an integer from 0 to 65535. The default time is 10 seconds. A value of 0 means that there is no delay…
scalarSpfTimerRange.1.3.6.1.4.1.4526.10.2.4.13
agentOspfAutoCostRefBw
Auto cost refernece bandwidth of the router interafaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is 100 Mbps.
scalarAutoCostRefBw.1.3.6.1.4.1.4526.10.2.4.14
agentOspfOpaqueLsaSupport
The router's support for Opaque LSA types. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4526.10.2.4.15
agentOspfAreaOpaqueLsdbTable
The OSPF Process's Area Link State Database (LSDB). The LSDB contains type-10 Link State Advertisements from throughout the areas that the device is attached to.
table-.1.3.6.1.4.1.4526.10.2.4.16
agentOspfLocalLsdbTable
The OSPF Process's Link-Local Link State Database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only Link-Local Link State Adve…
table-.1.3.6.1.4.1.4526.10.2.4.17
agentOspfAsLsdbTable
The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. …
table-.1.3.6.1.4.1.4526.10.2.4.18
agentOspfDefaultPassiveMode
Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4526.10.2.4.19
agentOspfDefaultMetricConfigured
Flag to determine whether OSPF default-metric is configured or not. Set to 'false' to unconfigure the OSPF default-metric. Set to 'true' is not allowed.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4526.10.2.4.2
agentOspfRoutePrefIntraArea
The route preference, sometimes called administrative distance, for intra-area OSPFv2 routes. A route with a preference of 255 is considered unreachable.
scalarInteger32.1.3.6.1.4.1.4526.10.2.4.20
agentOspfRoutePrefInterArea
The route preference, sometimes called administrative distance, for inter-area OSPFv2 routes. A route with a preference of 255 is considered unreachable.
scalarInteger32.1.3.6.1.4.1.4526.10.2.4.21
agentOspfRoutePrefExternal
The route preference, sometimes called administrative distance, for external OSPFv2 routes. A route with a preference of 255 is considered unreachable.
scalarInteger32.1.3.6.1.4.1.4526.10.2.4.22
agentOspfDefaultInfoOriginate
Flag to determine, whether OSPF can advertise a default-route learned from another protocol.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4526.10.2.4.3
agentOspfDefaultInfoOriginateAlways
When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a def…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4526.10.2.4.4
agentOspfDefaultInfoOriginateMetric
Metric of the default route, which OSPF advertises when learned from other protocol. (0) indicates that the parameter is not configured, this value should not be set. Valid range …
scalarInteger32.1.3.6.1.4.1.4526.10.2.4.5
agentOspfDefaultInfoOriginateMetricConfigured
Flag to determine whether OSPF default-info originate metric is configured or not. Setting to false unconfigures the default route metric. Setting to true is not allowed.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4526.10.2.4.6
agentOspfDefaultInfoOriginateMetricType
Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
scalarEnumeration.1.3.6.1.4.1.4526.10.2.4.7
agentOspfRouteRedistTable
This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP,…
table-.1.3.6.1.4.1.4526.10.2.4.8
agentOspfIfTable
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.
table-.1.3.6.1.4.1.4526.10.2.4.9