agentOspfDefaultPassiveMode
NETGEAR-ROUTING-MIB ·
.1.3.6.1.4.1.4526.10.2.4.19
Object
Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation.
Context
- MIB
- NETGEAR-ROUTING-MIB
- OID
.1.3.6.1.4.1.4526.10.2.4.19- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- agentRouterOspfConfigGroup
- Siblings
- 21
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentOspfDefaultMetric Default metric of redistributed routes, when OSPF redistributes
from other protocols. {0} indicates that the parameter is not configured,
this value should not be set. Valid rang… | scalar | Integer32 | .1.3.6.1.4.1.4526.10.2.4.1 |
| agentOspfVirtIfTable Information about this router's virtual inter-
faces. Augments ospfVirtIfTable from the OSPF-MIB. | table | - | .1.3.6.1.4.1.4526.10.2.4.10 |
| agentRouterOspfRFC1583CompatibilityMode From RFC2328:
Controls the preference rules used in Section 16.4 when
choosing among multiple AS-external-LSAs advertising the
same destination. When set to 'enabled', the prefer… | scalar | Enumeration | .1.3.6.1.4.1.4526.10.2.4.11 |
| agentOspfSpfDelayTime Delay time (in seconds) between when OSPF
receives a topology change and when it
starts an SPF calculation. It can be an
integer from 0 to 65535. The default
time is 5 seconds. A … | scalar | SpfTimerRange | .1.3.6.1.4.1.4526.10.2.4.12 |
| agentOspfSpfHoldTime Minimum time (in seconds) between two
consecutive SPF calculations. It can
be an integer from 0 to 65535. The
default time is 10 seconds. A value
of 0 means that there is no delay… | scalar | SpfTimerRange | .1.3.6.1.4.1.4526.10.2.4.13 |
| agentOspfAutoCostRefBw Auto cost refernece bandwidth of the
router interafaces for ospf metric calculations.
It can be an integer from 1 to 4294967. The
default reference bandwidth is 100 Mbps. | scalar | AutoCostRefBw | .1.3.6.1.4.1.4526.10.2.4.14 |
| agentOspfOpaqueLsaSupport The router's support for Opaque LSA types.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.2.4.15 |
| agentOspfAreaOpaqueLsdbTable The OSPF Process's Area Link State Database (LSDB).
The LSDB contains type-10 Link State Advertisements
from throughout the areas that the device is attached to. | table | - | .1.3.6.1.4.1.4526.10.2.4.16 |
| agentOspfLocalLsdbTable The OSPF Process's Link-Local Link State Database
for non-virtual links.
This table is identical to the OSPF LSDB Table
in format, but contains only Link-Local Link State
Adve… | table | - | .1.3.6.1.4.1.4526.10.2.4.17 |
| agentOspfAsLsdbTable The OSPF Process's AS-scope LSA Link State Database.
The Database contains the AS-scope Link State
Advertisements from throughout the areas that
the device is attached to.
… | table | - | .1.3.6.1.4.1.4526.10.2.4.18 |
| agentOspfDefaultMetricConfigured Flag to determine whether OSPF default-metric is configured or not.
Set to 'false' to unconfigure the OSPF default-metric. Set to 'true' is
not allowed. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.2.4.2 |
| agentOspfRoutePrefIntraArea The route preference, sometimes called administrative distance, for intra-area OSPFv2 routes.
A route with a preference of 255 is considered unreachable. | scalar | Integer32 | .1.3.6.1.4.1.4526.10.2.4.20 |
| agentOspfRoutePrefInterArea The route preference, sometimes called administrative distance, for inter-area OSPFv2 routes.
A route with a preference of 255 is considered unreachable. | scalar | Integer32 | .1.3.6.1.4.1.4526.10.2.4.21 |
| agentOspfRoutePrefExternal The route preference, sometimes called administrative distance, for external OSPFv2 routes.
A route with a preference of 255 is considered unreachable. | scalar | Integer32 | .1.3.6.1.4.1.4526.10.2.4.22 |
| agentOspfDefaultInfoOriginate Flag to determine, whether OSPF can advertise a default-route learned
from another protocol. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.2.4.3 |
| agentOspfDefaultInfoOriginateAlways When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always.
Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the
router's forwarding table contains a def… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.2.4.4 |
| agentOspfDefaultInfoOriginateMetric Metric of the default route, which OSPF advertises when learned from
other protocol.
(0) indicates that the parameter is not configured, this value should not be set.
Valid range … | scalar | Integer32 | .1.3.6.1.4.1.4526.10.2.4.5 |
| agentOspfDefaultInfoOriginateMetricConfigured Flag to determine whether OSPF default-info originate metric
is configured or not. Setting to false unconfigures the
default route metric. Setting to true is not allowed. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4526.10.2.4.6 |
| agentOspfDefaultInfoOriginateMetricType Metric Type of the default route,which OSPF advertises when learned from
other protocol. It can be 1(external type 1) or 2(external type 2). | scalar | Enumeration | .1.3.6.1.4.1.4526.10.2.4.7 |
| agentOspfRouteRedistTable This table contains the MIB objects required to configure
route-redistribution for OSPF. Here, OSPF is the Destination
protocol and the source protocols can be any of : BGP, RIP,… | table | - | .1.3.6.1.4.1.4526.10.2.4.8 |
| agentOspfIfTable The OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF. Augments
ospfIfTable from the OSPF-MIB. | table | - | .1.3.6.1.4.1.4526.10.2.4.9 |