rlDhcpClAutoConfigProtocol

NETGEAR-RADLAN-DHCPCL-MIB · .1.3.6.1.4.1.4526.17.76.22
MIB view Table view

Object

scalar r/w Enumeration 
Describes the auto-config process protocol.
tftp - only the TFTP protocol is used by auto-configuration.
scp - only the SCP protocol is used by auto-configuration.
auto-(Default) Auto-configuration uses the TFTP or SCP protocol
depending on the configuration file's extension.
If this option is selected, the extension parameter may be
specified or, if not, the default extension is used.

Context

MIB
NETGEAR-RADLAN-DHCPCL-MIB
OID
.1.3.6.1.4.1.4526.17.76.22
Type
scalar
Access
readwrite
Status
current
Parent
rlDhcpCl
Siblings
29

Syntax

Enumeration

Values & Constraints

Enumerated Values
1tftp
2scp
3auto

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rlDhcpClManualTftpServerAddress
Manually configured TFTP server IP Address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4526.17.76.10
rlDhcpClSelectedTftpServerAddress
Currently selected TFTP server IP Address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.4526.17.76.11
rlDhcpClSelectedTftpServerAddressOrigin
Currently selected TFTP server IP Address's origin
scalarEnumeration.1.3.6.1.4.1.4526.17.76.12
rlDhcpClManualConfigurationFileName
The manually configured file name.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4526.17.76.13
rlDhcpClSelectedConfigurationFileName
The selected configuration file name.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4526.17.76.14
rlDhcpClSelectedConfigurationFileNameOrigin
The selected configuration files name origin.
scalarEnumeration.1.3.6.1.4.1.4526.17.76.15
rlDhcpClEnabledByDefaultRemovedIfindex
DHCP Client flag is relevant when host parameter dhcp_client_active_on_start is TRUE. If the MIB has non zero value the meaning is that DHCP client has removed from configuration …
scalarInteger32.1.3.6.1.4.1.4526.17.76.16
rlDhcpClAutoUpdateEnabled
Setting this MIB value to True/False enables/disables DHCP auto-update process in the device (through option 125).
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4526.17.76.17
rlDhcpClAutoUpdateStatus
Describes the status of current/last DHCP auto-update process.
scalarEnumeration.1.3.6.1.4.1.4526.17.76.18
rlDhcpClAutoConfigForce
Setting this MIB value to True will force DHCP auto-config process after next reboot. This configuration will take effect only during the time period between the next 2 reboots of…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4526.17.76.19
rlDhcpClAutoConfigAutoSave
Setting this MIB value to True configures automatic saving of running-cdb into startup-cdb, to be done at the end of successful DHCP auto-config process to running-cdb.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4526.17.76.20
rlDhcpClAutoConfigStatus
Describes the status of current/last DHCP auto-config process.
scalarEnumeration.1.3.6.1.4.1.4526.17.76.21
rlDhcpClAutoConfigScpFileExtention
Describes the SCP file extention. When no vlaue is specified, 'scp' extension is used.
scalarOctetString.1.3.6.1.4.1.4526.17.76.23
rlDhcpClSelectedTftpServerInetAddressType
Currently selected TFTP server Inet Address type.
scalarINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.4526.17.76.24
rlDhcpClSelectedTftpServerInetAddress
Currently selected TFTP server inet Address.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.4526.17.76.25
rlDhcpClManualAutoConfigDataTable
A table for configuring default values for auto-config/ auto-update process. These values during the process, in case no appropriate data was received from the DHCP server.
table-.1.3.6.1.4.1.4526.17.76.26
rlDhcpClInformationTable
The (conceptual) table mentione IP address which must be released/renewed on the interface.
table-.1.3.6.1.4.1.4526.17.76.27
rlDhcpClInformationDnsServerListTable
The table saved the list of DNS servers received by DHCP client.
table-.1.3.6.1.4.1.4526.17.76.28
rlDhcpClInformationTftpServerListTable
The table saved the list of Tftp servers received by DHCP client.
table-.1.3.6.1.4.1.4526.17.76.29
rlDhcpClActionTable
The (conceptual) table mentione IP address which must be released/renewed on the interface.
table-.1.3.6.1.4.1.4526.17.76.3
rlDhcpClAutoUpdateProtocol
Describes the auto-update process protocol. tftp - only the TFTP protocol is used by auto-update. scp - only the SCP protocol is used by auto-update. auto-(Default) Auto-update us…
scalarEnumeration.1.3.6.1.4.1.4526.17.76.30
rlDhcpClAutoUpdateScpFileExtention
Describes the SCP file extention used for auto-update. When no vlaue is specified, 'scp' extension is used.
scalarOctetString.1.3.6.1.4.1.4526.17.76.31
rlDhcpClEnabledByDefaultRemovedTable
DHCP Client flag is relevant when host parameter dhcp_client_active_on_start is TRUE. If the MIB has non zero value the meaning is that DHCP client has removed from configuration …
table-.1.3.6.1.4.1.4526.17.76.32
rlDhcpApprovalEnabled
DHCP Approval feature status - enable (True) or desable (False). Must be True only if DHCP Approval supported, device has only one ip interface and default ip exist.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4526.17.76.4
rlDhcpApprovalWaitingTable
IP addresses waiting for approval.
table-.1.3.6.1.4.1.4526.17.76.5
rlDhcpApprovalActionTable
Action for waiting ip address (approve/decline).
table-.1.3.6.1.4.1.4526.17.76.6
rlDhcpClCommandTable
Action MIB for DHCP Renew command.
table-.1.3.6.1.4.1.4526.17.76.7
rlDhcpClConfigurationFileName
The configuration file name that loaded into the device. The filename is a relative path on the TFTP server, without the server IP address.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4526.17.76.8
rlDhcpClOption67Enable
Defines whether the configuration file can be downloaded from DHCP packet option 67.
scalarEnumeration.1.3.6.1.4.1.4526.17.76.9