netportIfgPort
NETAPP-MIB ·
.1.3.6.1.4.1.789.1.22.2.1.17
Object
column
SNMPv2-TCDisplayString
This field shows the if-group port if the port type is if-group, It show an empty string, otherwise.
Context
- MIB
- NETAPP-MIB
- OID
.1.3.6.1.4.1.789.1.22.2.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- netportEntry
- Table
- netportTable
- Siblings
- 31
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| netportNode Node where the port belongs to. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.2.1.1 |
| netportSpeedAdmin The speed of the port set by an administrator.
It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or ten Gb/s(5). | column | Enumeration | .1.3.6.1.4.1.789.1.22.2.1.10 |
| netportSpeedOper The speed appears on the port.
It can be either undef(0), auto(1), ten Mb/s(2), hundred Mb/s(3), one Gb/s(4), or ten Gb/s(5). | column | Enumeration | .1.3.6.1.4.1.789.1.22.2.1.11 |
| netportSpeed The speed that appears in the port scaled to megabits/sec. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.789.1.22.2.1.12 |
| netportMac The port's MAC address | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.2.1.13 |
| netportUpAdmin Indicates whether the port status is set 'UP' by an administrator. | column | Boolean | .1.3.6.1.4.1.789.1.22.2.1.14 |
| netportType The type of the port which can be either physical(0), if-group(1), vlan(2) or undef(3). | column | Enumeration | .1.3.6.1.4.1.789.1.22.2.1.15 |
| netportIfgNode This field shows the if-group node name if the port type is if-group,
It show an empty string, otherwise. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.2.1.16 |
| netportIfgDistrFunc If the port type is if-group, this field shows the distribution
function of the port. This function is used to pick the forwarding
port for a packet. It can be either mac(0), ip(1… | column | Enumeration | .1.3.6.1.4.1.789.1.22.2.1.18 |
| netportIfgMode If the port type is if-group, this field shows the if-group's
policy. It can be either multimode(0), multimode-lacp(1), or
single-mode(2). Otherwise, it shows an empty string. The… | column | Enumeration | .1.3.6.1.4.1.789.1.22.2.1.19 |
| netportPort Port identity. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.2.1.2 |
| netportVlanNode If the port type is vlan, this field shows its vlan node.
Otherwise, it shows an empty string. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.2.1.20 |
| netportVlanPort If the port type is vlan, this field shows its vlan port.
Otherwise, it shows an empty string. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.2.1.21 |
| netportVlanTag If the port type is vlan, this field shows its vlan tag.
Otherwise, it shows an empty string. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.789.1.22.2.1.22 |
| netportFlowcontrolAdmin The flowcontrol of the port set by an administrator.
It can be either undef(0), none(1), receive(2), send(3), or full(4). | column | Enumeration | .1.3.6.1.4.1.789.1.22.2.1.23 |
| netportFlowcontrolOper The flowcontrol that appears on the port.
It can be either undef(0), none(1), receive(2), send(3), or full(4). | column | Enumeration | .1.3.6.1.4.1.789.1.22.2.1.24 |
| netportAutorevertDelay If the port is designated as a cluster port, this field shows
the delay in seconds before auto reverting a LIF to this port.
otherwise, it shows an empty string. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.789.1.22.2.1.25 |
| netportRemoteDeviceId Remote device ID discovered by L2 protocol. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.2.1.26 |
| netportIPspace IPspace where the port is assigned. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.2.1.27 |
| netportBroadcastDomain Broadcast Domain of the port is assigned. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.2.1.28 |
| netportMtuAdmin The Maximum Transmission Unit (MTU) set by the Administrator
(in bytes) of the largest packet that is supported by the
port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.789.1.22.2.1.29 |
| netportRole Role of the port. A port must have one of the following roles:
cluster(1), data(2), mgmt(3), intercluster(4), cluster-mgmt(5) or undef(0).
The cluster port is used to communicate… | column | Enumeration | .1.3.6.1.4.1.789.1.22.2.1.3 |
| netportHealthStatus The health status of the port. | column | Enumeration | .1.3.6.1.4.1.789.1.22.2.1.30 |
| netportIgnoreHealthStatus The health overrided status of the port. | column | Boolean | .1.3.6.1.4.1.789.1.22.2.1.31 |
| netportDegradedReason The list of reasons why the port is marked as degraded | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.2.1.32 |
| netportLinkState The link-state of the port.
Normally it is either UP(2) or DOWN(3). | column | Enumeration | .1.3.6.1.4.1.789.1.22.2.1.4 |
| netportMtu The Maximum Transmission Unit (MTU) refers to the size (in bytes)
of the largest packet that is supported by the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.789.1.22.2.1.5 |
| netportAutonegAdmin Indicates whether the port's auto-negotiation property
is enabled by an administrator. | column | Boolean | .1.3.6.1.4.1.789.1.22.2.1.6 |
| netportAutonegOper Indicates whether the auto-negotiation is enabled on the port. | column | Boolean | .1.3.6.1.4.1.789.1.22.2.1.7 |
| netportDuplexAdmin The duplex mode of the port set by the administrator.
It can be either undef(0), auto(1), half-duplex(2), or full-duplex(3). | column | Enumeration | .1.3.6.1.4.1.789.1.22.2.1.8 |
| netportDuplexOper The duplex mode appears on the port.
It can be either undef(0), auto(1), half-duplex(2), or full-duplex(3). | column | Enumeration | .1.3.6.1.4.1.789.1.22.2.1.9 |