logicalInterfaceNetmask
NETAPP-MIB ·
.1.3.6.1.4.1.789.1.22.4.1.12
Object
column
SNMPv2-SMIIpAddress
The netmask assigned to the interface. This field only displays ipv4 netmasks correctly. Ipv6 netmasks will display as 0.0.0.0. Refer to the logicalInterfaceAddressString field for the netmask length of an ipv6 interface.
Context
- MIB
- NETAPP-MIB
- OID
.1.3.6.1.4.1.789.1.22.4.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- logicalInterfaceEntry
- Table
- logicalInterfaceTable
- Siblings
- 29
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| logicalInterfaceServer The node where the logical interface belongs to. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.1 |
| logicalInterfaceIsHome Indicates whether the interface is at the home node. | column | Boolean | .1.3.6.1.4.1.789.1.22.4.1.10 |
| logicalInterfaceAddress The IP address assigned to the interface. This field only
displays ipv4 addresses correctly. Ipv6 addresses will display as
0.0.0.0. Refer to the logicalInterfaceAddressString fie… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.789.1.22.4.1.11 |
| logicalInterfaceNetmaskLength The number of set bits of the netmask. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.789.1.22.4.1.13 |
| logicalInterfaceRoutingGroup The interface's routing group name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.14 |
| logicalInterfaceStatusAdmin The status of the interface assigned by an administrator.
It can be either UP(0) or DOWN(1). | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.15 |
| logicalInterfaceFailoverPolicy The interface's failover policy.
It can be next-available(0), where the interface will failover to any
next available interface, priority(1), where the interface will failover to
… | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.16 |
| logicalInterfaceFirewallPolicy The firewall policy of the interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.17 |
| logicalInterfaceAutoRevert Indicates whether the auto-revert property of the interface is set.
If the value is 'true', the interface will automatically revert back to the home port
whenever the interface is… | column | Boolean | .1.3.6.1.4.1.789.1.22.4.1.18 |
| logicalInterfaceSticky Indicates whether the sticky bit is set. It is the readonly field that is set by
the system. When it is set, the interface's auto-revert is disabled.
It is set when the interface … | column | Boolean | .1.3.6.1.4.1.789.1.22.4.1.19 |
| logicalInterfaceVif The name of the logical interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.2 |
| logicalInterfaceUseFailoverGroup The field identifies whether the interface's failover is system-defined(0),
set to 'enabled'(1) or 'disable'(2). | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.20 |
| logicalInterfaceDnsZone The interface's DNS Zone | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.21 |
| logicalInterfaceAllowLbMigrate Indicates whether the load balancing migration
is enabled for the interface. | column | Boolean | .1.3.6.1.4.1.789.1.22.4.1.22 |
| logicalInterfaceLbWeight The load balancing weight of the interface.
It can be either minimum (0), maximum(100), or load(101). | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.23 |
| logicalInterfaceFailoverGroup The interface failover group's name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.24 |
| logicalInterfaceStatusVserver The status of the interface with respect to its Vserver.
It can be either UP(0) or DOWN(1). | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.25 |
| logicalInterfaceDataProtocol A list of data protocols. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.26 |
| logicalInterfaceFcpWwpn The WWPN of a FCP data LIF. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.27 |
| logicalInterfaceComment A comment to further identify a LIF. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.28 |
| logicalInterfaceListenForDnsQuery Indicates whether the LIF has to listen for DNS
queries for load-balancing. | column | Boolean | .1.3.6.1.4.1.789.1.22.4.1.29 |
| logicalInterfaceRole The role of logical interface. An interface can have one of the following roles:
undef(0), cluster(1), data(2), mgmt(3), intercluster(4), and cluster-mgmt(5).
The cluster interfac… | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.3 |
| logicalInterfaceAddressString The IP address assigned to the interface. This field displays
properly for both ipv4 addresses as well as ipv6 addresses.
Format: <ip address>/<netmask length> | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.30 |
| logicalInterfaceHomeNode The home node of the interface where the interface is initially setup. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.4 |
| logicalInterfaceHomePort The home port of the interface where the interface is initially setup. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.5 |
| logicalInterfaceCurrNode The node where the interface is currently on. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.6 |
| logicalInterfaceCurrPort The port where the interface is currently attached to. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.7 |
| logicalInterfaceStatusOper The operational status, which can be UP(0) or DOWN(1). | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.8 |
| logicalInterfaceNumericId The interface ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.789.1.22.4.1.9 |