logicalInterfaceFailoverGroup
NETAPP-MIB ·
.1.3.6.1.4.1.789.1.22.4.1.24
Object
column
SNMPv2-TCDisplayString
The interface failover group's name.
Context
- MIB
- NETAPP-MIB
- OID
.1.3.6.1.4.1.789.1.22.4.1.24- Type
- column
- Access
- readonly
- Status
- current
- Parent
- logicalInterfaceEntry
- Table
- logicalInterfaceTable
- Siblings
- 29
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| logicalInterfaceServer The node where the logical interface belongs to. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.1 |
| logicalInterfaceIsHome Indicates whether the interface is at the home node. | column | Boolean | .1.3.6.1.4.1.789.1.22.4.1.10 |
| logicalInterfaceAddress The IP address assigned to the interface. This field only
displays ipv4 addresses correctly. Ipv6 addresses will display as
0.0.0.0. Refer to the logicalInterfaceAddressString fie… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.789.1.22.4.1.11 |
| logicalInterfaceNetmask The netmask assigned to the interface. This field only
displays ipv4 netmasks correctly. Ipv6 netmasks will display as
0.0.0.0. Refer to the logicalInterfaceAddressString field fo… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.789.1.22.4.1.12 |
| logicalInterfaceNetmaskLength The number of set bits of the netmask. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.789.1.22.4.1.13 |
| logicalInterfaceRoutingGroup The interface's routing group name | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.14 |
| logicalInterfaceStatusAdmin The status of the interface assigned by an administrator.
It can be either UP(0) or DOWN(1). | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.15 |
| logicalInterfaceFailoverPolicy The interface's failover policy.
It can be next-available(0), where the interface will failover to any
next available interface, priority(1), where the interface will failover to
… | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.16 |
| logicalInterfaceFirewallPolicy The firewall policy of the interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.17 |
| logicalInterfaceAutoRevert Indicates whether the auto-revert property of the interface is set.
If the value is 'true', the interface will automatically revert back to the home port
whenever the interface is… | column | Boolean | .1.3.6.1.4.1.789.1.22.4.1.18 |
| logicalInterfaceSticky Indicates whether the sticky bit is set. It is the readonly field that is set by
the system. When it is set, the interface's auto-revert is disabled.
It is set when the interface … | column | Boolean | .1.3.6.1.4.1.789.1.22.4.1.19 |
| logicalInterfaceVif The name of the logical interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.2 |
| logicalInterfaceUseFailoverGroup The field identifies whether the interface's failover is system-defined(0),
set to 'enabled'(1) or 'disable'(2). | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.20 |
| logicalInterfaceDnsZone The interface's DNS Zone | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.21 |
| logicalInterfaceAllowLbMigrate Indicates whether the load balancing migration
is enabled for the interface. | column | Boolean | .1.3.6.1.4.1.789.1.22.4.1.22 |
| logicalInterfaceLbWeight The load balancing weight of the interface.
It can be either minimum (0), maximum(100), or load(101). | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.23 |
| logicalInterfaceStatusVserver The status of the interface with respect to its Vserver.
It can be either UP(0) or DOWN(1). | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.25 |
| logicalInterfaceDataProtocol A list of data protocols. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.26 |
| logicalInterfaceFcpWwpn The WWPN of a FCP data LIF. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.27 |
| logicalInterfaceComment A comment to further identify a LIF. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.28 |
| logicalInterfaceListenForDnsQuery Indicates whether the LIF has to listen for DNS
queries for load-balancing. | column | Boolean | .1.3.6.1.4.1.789.1.22.4.1.29 |
| logicalInterfaceRole The role of logical interface. An interface can have one of the following roles:
undef(0), cluster(1), data(2), mgmt(3), intercluster(4), and cluster-mgmt(5).
The cluster interfac… | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.3 |
| logicalInterfaceAddressString The IP address assigned to the interface. This field displays
properly for both ipv4 addresses as well as ipv6 addresses.
Format: <ip address>/<netmask length> | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.30 |
| logicalInterfaceHomeNode The home node of the interface where the interface is initially setup. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.4 |
| logicalInterfaceHomePort The home port of the interface where the interface is initially setup. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.5 |
| logicalInterfaceCurrNode The node where the interface is currently on. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.6 |
| logicalInterfaceCurrPort The port where the interface is currently attached to. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.789.1.22.4.1.7 |
| logicalInterfaceStatusOper The operational status, which can be UP(0) or DOWN(1). | column | Enumeration | .1.3.6.1.4.1.789.1.22.4.1.8 |
| logicalInterfaceNumericId The interface ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.789.1.22.4.1.9 |