nbsCmmcSysTimeZoneTable
NBS-CMMC-MIB ·
.1.3.6.1.4.1.629.200.2.1004
Object
table
A table to report supportable timezones.
Context
- MIB
- NBS-CMMC-MIB
- OID
.1.3.6.1.4.1.629.200.2.1004- Type
- table
- Status
- current
- Parent
- nbsCmmcSystemGrp
- Siblings
- 43
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsCmmcSysFwDescr The description of the System Control Firmware. | scalar | OctetString | .1.3.6.1.4.1.629.200.2.1 |
| nbsCmmcSysNvramTable Copy of Non-Volatile RAM kept in Agent, including
all settings, configurations, and names for all cards
managed by this Agent. | table | - | .1.3.6.1.4.1.629.200.2.10 |
| nbsCmmcSysProtoTableSize The number of entries in nbsCmmcSysProtoTable. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.200.2.1001 |
| nbsCmmcSysProtoTable A table to report supportable data transmission protocols. | table | - | .1.3.6.1.4.1.629.200.2.1002 |
| nbsCmmcSysTimeZoneTableSize The number of entries in nbsCmmcSysTimeZoneTable. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.200.2.1003 |
| nbsCmmcSysLoaderTableSize The maximum number of concurrent loader sessions. | scalar | Integer32 | .1.3.6.1.4.1.629.200.2.1010 |
| nbsCmmcSysLoaderTable A table to manage multiple loader (transfer from NM to blade
or line card) sessions. | table | - | .1.3.6.1.4.1.629.200.2.1011 |
| nbsCmmcSysFirmwareURL Remote URL in the form:
scheme://[username[:password]@]IP[:port][/path/]filename
to use for the remote entry in FirmwareTable. When set, the
remote URL will … | scalar | OctetString | .1.3.6.1.4.1.629.200.2.1020 |
| nbsCmmcSysFirmwareURLStatus The state of the URL fetch process initiated by
a write to SysFirmwareURL. Setting the Chassis or
SlotFirmwareLoad object to the URL index will be rejected
unless this object retu… | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.1021 |
| nbsCmmcSysWriteConfig This object is used to write the configuration file. If
this returns supported, the SNMP Agent requires you to
specifically write the configuration file. Any changes
that are not … | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.11 |
| nbsCmmcSysUpgrade deprecated This object allows user to initiate a transfer
of firmware from the NM file system to the cards
in selected slots. Before using, user should ensure
the proper files have been loa… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.629.200.2.12 |
| nbsCmmcSysLoginIdleTimeout This object is used to control the idle logout timer.
This timer is in minutes. If a user logged into the CLI
has not typed anything for this number of minutes,
the session is aut… | scalar | Integer32 | .1.3.6.1.4.1.629.200.2.13 |
| nbsCmmcSysDiscoveryAdmin The Discovery protocol allows Linux NM cards
to find each other on a single layer 2 network
segment. By default it is enabled. | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.14 |
| nbsCmmcSysDiscoveryHostTable Table that contains host information found using the L2
Discovery protocol | table | - | .1.3.6.1.4.1.629.200.2.15 |
| nbsCmmcSysLastSetFailure If the last SNMP SET was rejected, for example with
SNMP Error: BadValue (SNMP Error 3), this object
should explain why the SET failed.
This string may be empty (size 0… | scalar | OctetString | .1.3.6.1.4.1.629.200.2.16 |
| nbsCmmcSysTimeProtocol Time Protocol (RFC 868) allows the managed device to
synchronize its clock with a Time Server.
When read, the agent will report notSupported(1) if this
object is not su… | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.17 |
| nbsCmmcSysTimeServer The IP Address of the Time Server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.629.200.2.18 |
| nbsCmmcSysFirmwareTable Table that lists firmware images loaded on NM. | table | - | .1.3.6.1.4.1.629.200.2.19 |
| nbsCmmcSysFwVers The System Control Firmware version in the form
Vmajor.minor. | scalar | OctetString | .1.3.6.1.4.1.629.200.2.2 |
| nbsCmmcSysTimeZone User-configurable TimeZone or offset from GMT. Should be
used to indicate the time local to the managed device.
If the system supports nbsCmmcSysTimeZoneTableSize and … | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.20 |
| nbsCmmcSysSnmpV1 This object enables or disables SNMPv1 protocol handling. | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.21 |
| nbsCmmcSysSnmpV2c This object enables or disables SNMPv2c protocol handling. | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.22 |
| nbsCmmcSysSnmpV3 This object enables or disables SNMPv3 protocol handling. | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.23 |
| nbsCmmcSysStpAdmin This object enables or disables STP protocol handling. | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.24 |
| nbsCmmcSysLockTypes If enabled, forces the system only to allow writes to slots/ports
that are detected as the same type as the configured type.
Use nbsCmmcSlotClearType to clear the configured type.… | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.25 |
| nbsCmmcSysSerialTerminalType Name of terminal to use for the serial port, e.g. vt100,
xterm, ansi. | scalar | OctetString | .1.3.6.1.4.1.629.200.2.26 |
| nbsCmmcSysCrossConnect For systems which have chassis/slots supporting cross-connect
functionality, this object is used to reflect the operating
state and clear the entire cross-connect map, including a… | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.27 |
| nbsCmmcSysCountersState This object is used to reset all counters in this device.
If agent does not have this feature, this object should
be notSupported(1).
In order to reset all c… | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.28 |
| nbsCmmcSysRestart This object is used to reset the system.
Writing a coldRestart(2), causes the SNMP Agent CPU
to be hardware reset, similar to a power-on cycle.
Writing a warmRestart(3)… | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.3 |
| nbsCmmcSysNVAreaTableSize The number of non-volatile firmware flash image areas system wide | scalar | Integer32 | .1.3.6.1.4.1.629.200.2.3000 |
| nbsCmmcSysNVAreaTable Table that lists firmware images loaded on a chassis, slot, or
port. | table | - | .1.3.6.1.4.1.629.200.2.3001 |
| nbsCmmcSysSerialBaudRateAdmin The Serial Console Baud Rate when not in SLIP Mode.
Setting this object will change the serial console baud
rate in the BootROM configuration. It will not take
effect until cold o… | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.31 |
| nbsCmmcSysSerialBaudRateOper The current operational Serial Console Baud Rate when not
in SLIP Mode. | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.32 |
| nbsCmmcSysTimeServAddressType The Address Type of the Time Server. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.629.200.2.33 |
| nbsCmmcSysTimeServAddress The IPv4 or IPv6 Address of the Time Server. This entry replaces nbsCmmcSysTimeServer | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.629.200.2.34 |
| nbsCmmcSysNumRestarts Number of warmRestarts executed by the system, since
the last coldRestart or power-on cycle.
A warmRestart may be initiated by:
- writing a warmRestart value in nbsCmmcSysRestart
… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.629.200.2.4 |
| nbsCmmcSysErrUptime The time (in hundredths of a second) since the last
cold reset/power cycle when a fatal error occurred.
This variable shows the system uptime from the last
cold reset/power on cyc… | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.629.200.2.5 |
| nbsCmmcSysDiscoveryOper The current operational status of the Discovery
protocol. | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.50 |
| nbsCmmcSysSetNvramDefaults Writing the value setDefaults to this objects will re-
store the defaults in the NVRAM data base. These
values will take effect after a system reset.
For the Linux-base… | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.6 |
| nbsCmmcSysStpOper The current operational status of the STP protocol. | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.60 |
| nbsCmmcSysSelftestLevel deprecated NVRAM based level of the system selftest.
The values are :
ststNone - meaning that no selftest will be executed
upon boot-up
ststShort- meaning that a short self… | scalar | Enumeration | .1.3.6.1.4.1.629.200.2.7 |
| nbsCmmcSysCurrentTime The current time, expressed as the number of seconds
since 00:00 (midnight) 1 January 1900 GMT. Obtained
via Time Protocol (RFC 868) or set by user.
Not supported valu… | scalar | Unsigned32 | .1.3.6.1.4.1.629.200.2.8 |
| nbsCmmcSysCurrentDateTime The current time, derived from nbsCmmcSysCurrentTime,
adjusted to Agent's local time (nbsCmmcSysTimeZone),
expressed in the format 'www mm dd hh:mm:ss yyyy'.
If nbsCmmcSysCurrentT… | scalar | OctetString | .1.3.6.1.4.1.629.200.2.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsCmmcSysTimeZoneEntry Describes a timezone. | row | - | .1.3.6.1.4.1.629.200.2.1004.1 |