nbsCmmcSlotRedundancyOper
NBS-CMMC-MIB ·
.1.3.6.1.4.1.629.200.7.1.1.36
Object
column
Enumeration
This object reports the actual redundancy state of a card.
For cards that do not support this feature, any reads of
this object should get the response notSupported (1).
Context
- MIB
- NBS-CMMC-MIB
- OID
.1.3.6.1.4.1.629.200.7.1.1.36- Type
- column
- Access
- readonly
- Status
- current
- Parent
- nbsCmmcSlotEntry
- Table
- nbsCmmcSlotTable
- Siblings
- 40
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notSupported |
2 | disabled |
3 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsCmmcSlotChassisIndex The index of the Chassis to the Slot is connected. | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.1 |
| nbsCmmcSlotName The user assigned name for this slot. | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.10 |
| nbsCmmcSlotModuleType Equivalent to nbsCmmcSlotType, except for modules
that occupy more than one slot in a chassis. For such multi-
slot modules, this ModuleType indicates the product this slot
is a … | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.11 |
| nbsCmmcSlotModuleSlot This indicates the position of this slot within its module.
For one-slot modules this value is always one (1). For
multi-slot modules, this is a positive integer between 1
and th… | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.12 |
| nbsCmmcSlotSwConfigurable Indicates whether card is software configurable, usually
based on hardware jumper/dip switch settings. If any changes
to the hardware configuration are allowed, this value will b… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.13 |
| nbsCmmcSlotConfiguration Bit stream containing current configuration of slot. | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.14 |
| nbsCmmcSlotMacAddress MAC Address of this card.
If this object is not supported, this string should be empty. | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.15 |
| nbsCmmcSlotIPAddress For non-NM cards which feature independent IP
stacks, this is the SNMP Agent Administrative value
of the IP Address for the card in this slot. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.629.200.7.1.1.16 |
| nbsCmmcSlotSubnetMask For non-NM cards which feature independent IP
stacks, this is the SNMP Agent Administrative value
of the SubnetMask for the card in this slot. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.629.200.7.1.1.17 |
| nbsCmmcSlotBroadcastAddr For non-NM cards which feature independent IP
stacks, this is the SNMP Agent Administrative value
of the IP Broadcast Address for the card in this slot. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.629.200.7.1.1.18 |
| nbsCmmcSlotDefGateway For non-NM cards which feature independent IP
stacks, this is the SNMP Agent Administrative value
of the Default Gateway for the card in this slot. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.629.200.7.1.1.19 |
| nbsCmmcSlotIndex The slot index. | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.2 |
| nbsCmmcSlotHoming This object describes the cabling topology of
CO / CPE pairs. It must be supported on the
Customer Premises Equipment (CPE) slots.
Any card that does not utilize t… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.20 |
| nbsCmmcSlotRedundancyAdmin This object is used to disable redundancy on certain cards
that support the 802.3ah standard, but if supported, the
preferred method is to use the object nbsCmmcPortEnableAdmin
to… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.21 |
| nbsCmmcSlotDescr Agent description of this slot. | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.22 |
| nbsCmmcSlotUpgradable This object indicates whether the card in this slot
can now be reprogrammed. It should be used together
with nbsCmmcSysUpgrade.
Cards without reprogrammable firmwa… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.23 |
| nbsCmmcSlotCrossConnect For slots supporting cross-connect functionality, this
object is used to reflect the operating state and
clear the entire cross-connect map for this slot.
If the sl… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.24 |
| nbsCmmcSlotClearType When nbsCmmcSysLockTypes is enabled, use this object
to clear the configured slot type. Issue a set command
with a value of clearType(3). A read of this object
will always retur… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.25 |
| nbsCmmcSlotNVAreaBanks The maximum number of executable images that can be stored
locally on this module.
This number does not count any memory banks that are in
a modular subcomponent of… | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.26 |
| nbsCmmcSlotFirmwareCaps This bitmask indicates which executable images this module can
support. This object is mandatory for all modules.
Bit 0 is reserved.
Subsequent bits… | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.27 |
| nbsCmmcSlotFirmwareLoad This bitmask indicates which executable images this module
has stored in its own NV area. This object is mandatory for
all modules.
OCTET STRING bitmasks count the… | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.28 |
| nbsCmmcSlotNVAreaAdmin A SET on this object will force the corresponding
nbsCmmcSysNvAreaStatus to primary, set this module's other
memory banks to backup, and immediately load and execute
the firmware … | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.29 |
| nbsCmmcSlotType The front panel of card in the slot. | column | NBS-CMMCENUM-MIBNbsCmmcEnumSlotType | .1.3.6.1.4.1.629.200.7.1.1.3 |
| nbsCmmcSlotNVAreaOper The nbsCmmcSysNVAreaBank of nbsCmmcSysNVAreaTable corresponding
to the current operationally active firmware image.
0 indicates the current active image is NOT in t… | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.30 |
| nbsCmmcSlotLoader The nbsCmmcSysLoaderIndex of nbsCmmcSysLoaderTable
corresponding to the current loading session.
0 indicates no loading session is active. | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.31 |
| nbsCmmcSlotSerialNum SerialNumber of this module.
If this object is not supported, this string should be empty. | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.32 |
| nbsCmmcSlotToggleRate For crossbar products. Used to indicate the approximate
rate, in microseconds, at which this card should toggle
its transmitters on and off.
Not supported value: 0 | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.33 |
| nbsCmmcSlotTemperature The temperature (in degrees celsius) of this slot.
Not supported value: 0x80000000 | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.34 |
| nbsCmmcSlotCountersState This object allows user to reset MAC counters on all ports. | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.35 |
| nbsCmmcSlotIfIndex Mib2-like ifIndex of this slot | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.629.200.7.1.1.37 |
| nbsCmmcSlotModuleStatus Slots that have no card installed should be reported as
empty(2).
Slots where a card has been physically inserted should be
reported as notReady(3) while the card i… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.38 |
| nbsCmmcSlotManagementPort This object, if set, reports the direct slot management port number.
For cards that do not support this feature the response will be 0. | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.39 |
| nbsCmmcSlotModel Describes the model of card that is currently in the slot. | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.4 |
| nbsCmmcSlotTemperatureLimit The maximum safe temperature (degrees Celsius) of the
Slot.
Not supported value: 0x80000000 | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.40 |
| nbsCmmcSlotTemperatureMin The minimum safe temperature (degrees Celsius) of the
Slot.
Not supported value: 0x80000000 | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.41 |
| nbsCmmcSlotObjectId The description of the type of card in the slot. | column | ObjectIdentifier | .1.3.6.1.4.1.629.200.7.1.1.5 |
| nbsCmmcSlotNumberOfPorts Number of ports on the card. | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.6 |
| nbsCmmcSlotHardwareRevision This describes the hardware revision of the card | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.7 |
| nbsCmmcSlotOperationType Operation of card.. | column | NBS-CMMCENUM-MIBNbsCmmcEnumSlotOperationType | .1.3.6.1.4.1.629.200.7.1.1.8 |
| nbsCmmcSlotReset Current reset condition, and possible reset types.
notSupported [1] - reported if feature unavailable.
operating [2] - indicates normal operating status.
phy [3] and queue [4] are… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.9 |