nbsCmmcSlotNVAreaAdmin
NBS-CMMC-MIB ·
.1.3.6.1.4.1.629.200.7.1.1.29
Object
column
r/w
Integer32
A SET on this object will force the corresponding
nbsCmmcSysNvAreaStatus to primary, set this module's other
memory banks to backup, and immediately load and execute
the firmware image contained in the specified memory bank.
A GET on this object will indicate the memory bank of this
module that is currently designated as primary.
Not supported value: -1
Context
- MIB
- NBS-CMMC-MIB
- OID
.1.3.6.1.4.1.629.200.7.1.1.29- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nbsCmmcSlotEntry
- Table
- nbsCmmcSlotTable
- Siblings
- 40
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsCmmcSlotChassisIndex The index of the Chassis to the Slot is connected. | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.1 |
| nbsCmmcSlotName The user assigned name for this slot. | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.10 |
| nbsCmmcSlotModuleType Equivalent to nbsCmmcSlotType, except for modules
that occupy more than one slot in a chassis. For such multi-
slot modules, this ModuleType indicates the product this slot
is a … | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.11 |
| nbsCmmcSlotModuleSlot This indicates the position of this slot within its module.
For one-slot modules this value is always one (1). For
multi-slot modules, this is a positive integer between 1
and th… | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.12 |
| nbsCmmcSlotSwConfigurable Indicates whether card is software configurable, usually
based on hardware jumper/dip switch settings. If any changes
to the hardware configuration are allowed, this value will b… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.13 |
| nbsCmmcSlotConfiguration Bit stream containing current configuration of slot. | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.14 |
| nbsCmmcSlotMacAddress MAC Address of this card.
If this object is not supported, this string should be empty. | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.15 |
| nbsCmmcSlotIPAddress For non-NM cards which feature independent IP
stacks, this is the SNMP Agent Administrative value
of the IP Address for the card in this slot. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.629.200.7.1.1.16 |
| nbsCmmcSlotSubnetMask For non-NM cards which feature independent IP
stacks, this is the SNMP Agent Administrative value
of the SubnetMask for the card in this slot. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.629.200.7.1.1.17 |
| nbsCmmcSlotBroadcastAddr For non-NM cards which feature independent IP
stacks, this is the SNMP Agent Administrative value
of the IP Broadcast Address for the card in this slot. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.629.200.7.1.1.18 |
| nbsCmmcSlotDefGateway For non-NM cards which feature independent IP
stacks, this is the SNMP Agent Administrative value
of the Default Gateway for the card in this slot. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.629.200.7.1.1.19 |
| nbsCmmcSlotIndex The slot index. | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.2 |
| nbsCmmcSlotHoming This object describes the cabling topology of
CO / CPE pairs. It must be supported on the
Customer Premises Equipment (CPE) slots.
Any card that does not utilize t… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.20 |
| nbsCmmcSlotRedundancyAdmin This object is used to disable redundancy on certain cards
that support the 802.3ah standard, but if supported, the
preferred method is to use the object nbsCmmcPortEnableAdmin
to… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.21 |
| nbsCmmcSlotDescr Agent description of this slot. | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.22 |
| nbsCmmcSlotUpgradable This object indicates whether the card in this slot
can now be reprogrammed. It should be used together
with nbsCmmcSysUpgrade.
Cards without reprogrammable firmwa… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.23 |
| nbsCmmcSlotCrossConnect For slots supporting cross-connect functionality, this
object is used to reflect the operating state and
clear the entire cross-connect map for this slot.
If the sl… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.24 |
| nbsCmmcSlotClearType When nbsCmmcSysLockTypes is enabled, use this object
to clear the configured slot type. Issue a set command
with a value of clearType(3). A read of this object
will always retur… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.25 |
| nbsCmmcSlotNVAreaBanks The maximum number of executable images that can be stored
locally on this module.
This number does not count any memory banks that are in
a modular subcomponent of… | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.26 |
| nbsCmmcSlotFirmwareCaps This bitmask indicates which executable images this module can
support. This object is mandatory for all modules.
Bit 0 is reserved.
Subsequent bits… | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.27 |
| nbsCmmcSlotFirmwareLoad This bitmask indicates which executable images this module
has stored in its own NV area. This object is mandatory for
all modules.
OCTET STRING bitmasks count the… | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.28 |
| nbsCmmcSlotType The front panel of card in the slot. | column | NBS-CMMCENUM-MIBNbsCmmcEnumSlotType | .1.3.6.1.4.1.629.200.7.1.1.3 |
| nbsCmmcSlotNVAreaOper The nbsCmmcSysNVAreaBank of nbsCmmcSysNVAreaTable corresponding
to the current operationally active firmware image.
0 indicates the current active image is NOT in t… | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.30 |
| nbsCmmcSlotLoader The nbsCmmcSysLoaderIndex of nbsCmmcSysLoaderTable
corresponding to the current loading session.
0 indicates no loading session is active. | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.31 |
| nbsCmmcSlotSerialNum SerialNumber of this module.
If this object is not supported, this string should be empty. | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.32 |
| nbsCmmcSlotToggleRate For crossbar products. Used to indicate the approximate
rate, in microseconds, at which this card should toggle
its transmitters on and off.
Not supported value: 0 | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.33 |
| nbsCmmcSlotTemperature The temperature (in degrees celsius) of this slot.
Not supported value: 0x80000000 | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.34 |
| nbsCmmcSlotCountersState This object allows user to reset MAC counters on all ports. | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.35 |
| nbsCmmcSlotRedundancyOper This object reports the actual redundancy state of a card.
For cards that do not support this feature, any reads of
this object should get the response notSupported… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.36 |
| nbsCmmcSlotIfIndex Mib2-like ifIndex of this slot | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.629.200.7.1.1.37 |
| nbsCmmcSlotModuleStatus Slots that have no card installed should be reported as
empty(2).
Slots where a card has been physically inserted should be
reported as notReady(3) while the card i… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.38 |
| nbsCmmcSlotManagementPort This object, if set, reports the direct slot management port number.
For cards that do not support this feature the response will be 0. | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.39 |
| nbsCmmcSlotModel Describes the model of card that is currently in the slot. | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.4 |
| nbsCmmcSlotTemperatureLimit The maximum safe temperature (degrees Celsius) of the
Slot.
Not supported value: 0x80000000 | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.40 |
| nbsCmmcSlotTemperatureMin The minimum safe temperature (degrees Celsius) of the
Slot.
Not supported value: 0x80000000 | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.41 |
| nbsCmmcSlotObjectId The description of the type of card in the slot. | column | ObjectIdentifier | .1.3.6.1.4.1.629.200.7.1.1.5 |
| nbsCmmcSlotNumberOfPorts Number of ports on the card. | column | Integer32 | .1.3.6.1.4.1.629.200.7.1.1.6 |
| nbsCmmcSlotHardwareRevision This describes the hardware revision of the card | column | OctetString | .1.3.6.1.4.1.629.200.7.1.1.7 |
| nbsCmmcSlotOperationType Operation of card.. | column | NBS-CMMCENUM-MIBNbsCmmcEnumSlotOperationType | .1.3.6.1.4.1.629.200.7.1.1.8 |
| nbsCmmcSlotReset Current reset condition, and possible reset types.
notSupported [1] - reported if feature unavailable.
operating [2] - indicates normal operating status.
phy [3] and queue [4] are… | column | Enumeration | .1.3.6.1.4.1.629.200.7.1.1.9 |