tftpTransCmd

This object, when read, always returns readValue(2).
          
Setting this object will initiate following actions:
swDownload(3)
    Download the firmware from TFTP server, filename on the server
    is specified by tftpSoftFileName.
configDownload(4)
    Download the startup-config from the TFTP server, filename on
    the server is specified by tftpConfFileName.
configUpLoad(5)
    Download the startup-config to the TFTP-Server, filename on the
    server is specified by tftpConfFileName.
allDownload(6)
    Download the startup-config and firmware from the TFTP server.
sdSwUpload(9)
    Upload software from main flash to SD card
sdSwDownload(10)
    Download software from SD card
sdConfigUpload(11)
    Upload the startup-config from main flash to SD card
sdConfigDownload(12)
    Download the startup-config from SD card
sdLoaderUpload(13)
    Upload bootloader from main flash to SD card
sdLoaderDownload(14)
    Download bootloader from SD card
sdCreateSnapshot(15)
    Upload Software, Loader and startup-config to SD card.
    Create filesystem if necesary
noOp(1)
    Cancel all running SNMP-initiated TFTP operations.
          
TFTP server IP address is configured by tftpServerIP variable.
          
If device does not perform any other maintenance operations, the
command will be executed, otherwise it will be denied.
          
In case of command execution:
    The value of tftpLastOp will change to the value of the command.
    tftpTransferStatus will reflect transfer progress (connecting-
    transferringData-endedOk/error).
    Current timestamp will be saved into tftpLastOpTime variable.
    During the execution a series of tftpStatusChange is sent.
          
In case of denial:
    tftpLastOp and tftpTransferStatus will not be affected.
    Current timestamp is also not saved into tftpLastOpTime variable.
    By quering tftpLastOpTime before and after setting the tftpTransCmd
    one can find out if the command was denied.
    Current operation that caused the denial can be queried by tftpLastOp.
    tftpStatusChange with tftpTransferStatus value of busyByOther is sent.

MIB

NATEKS-MIB

OID

.1.3.6.1.4.1.4249.2.6.1.6

Type

scalar

Access

readwrite

Status

current

Parent

tftp