mdmDTEActionDTROnToOff
Modem-MIB ·
.1.3.6.1.2.1.38.1.1.6.1.1
Object
column
r/w
Enumeration
Defines the action the modem will take when DTR drops.
If the value is set to ignore(1), the modem takes no action
when DTR drops. Typically, mdmDTEActionDTROffToOn would
also be set to ignore(1) if this object is set to ignore(1).
If the value is escapeToCommandMode(2), the modem remains
connected and enters command mode. If the value is
disconnectCall(3), the current call (if any) is terminated
and the modem will not auto-answer while DTR is off. If the
value is resetModem(4), the current call (if any) is
terminated and the modem is reset.
Context
- MIB
- Modem-MIB
- OID
.1.3.6.1.2.1.38.1.1.6.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mdmDTEInterfaceEntry
- Table
- mdmDTEInterfaceTable
- Siblings
- 4
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ignore |
2 | escapeToCommandMode |
3 | disconnectCall |
4 | resetModem |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mdmDTEActionDTROffToOn Defines the action the modem will take when DTR is raised.
If the value is set to ignore(1), the modem takes no action
when DTR is raised. Typically, mdmDTEActionD… | column | Enumeration | .1.3.6.1.2.1.38.1.1.6.1.2 |
| mdmDTESyncTimingSource The clock source for synchronous transmissions. If set to
internal(1), the modem is the clock source and sends the
clock signals to the DTE. If set to external(2)… | column | Enumeration | .1.3.6.1.2.1.38.1.1.6.1.3 |
| mdmDTESyncAsyncMode The operational mode of the modem. If the value is
syncAfterDial(3), the modem will accept commands in
asynchronous mode and change to synchronous mode to pass
data after a dial … | column | Enumeration | .1.3.6.1.2.1.38.1.1.6.1.4 |
| mdmDTEInactivityTimeout The amount of idle time in minutes that the modem will wait
before disconnecting a connection. When a call is connected
and no data is transferred (continuous marking condition) … | column | Integer32 | .1.3.6.1.2.1.38.1.1.6.1.5 |