mdmDTEActionDTROffToOn
Modem-MIB ·
.1.3.6.1.2.1.38.1.1.6.1.2
Object
column
r/w
Enumeration
Defines the action the modem will take when DTR is raised.
If the value is set to ignore(1), the modem takes no action
when DTR is raised. Typically, mdmDTEActionDTROnToOff would
also be set to ignore(1) if this object is set to ignore(1).
If the value is set to enableDial(2), the modem prepares to
dial an outgoing call. If the value is set to
autoAnswerEnable(3), the modem will be configured to answer
any incoming call. If the value is set to
establishConnection(4), the modem dials an implementation
specific number.
Immediately after any reset or power-on of the modem, if the
DTR is high, the action specified here will be executed.
Context
- MIB
- Modem-MIB
- OID
.1.3.6.1.2.1.38.1.1.6.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mdmDTEInterfaceEntry
- Table
- mdmDTEInterfaceTable
- Siblings
- 4
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ignore |
2 | enableDial |
3 | autoAnswerEnable |
4 | establishConnection |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mdmDTEActionDTROnToOff Defines the action the modem will take when DTR drops.
If the value is set to ignore(1), the modem takes no action
when DTR drops. Typically, mdmDTEActionDTROffToO… | column | Enumeration | .1.3.6.1.2.1.38.1.1.6.1.1 |
| mdmDTESyncTimingSource The clock source for synchronous transmissions. If set to
internal(1), the modem is the clock source and sends the
clock signals to the DTE. If set to external(2)… | column | Enumeration | .1.3.6.1.2.1.38.1.1.6.1.3 |
| mdmDTESyncAsyncMode The operational mode of the modem. If the value is
syncAfterDial(3), the modem will accept commands in
asynchronous mode and change to synchronous mode to pass
data after a dial … | column | Enumeration | .1.3.6.1.2.1.38.1.1.6.1.4 |
| mdmDTEInactivityTimeout The amount of idle time in minutes that the modem will wait
before disconnecting a connection. When a call is connected
and no data is transferred (continuous marking condition) … | column | Integer32 | .1.3.6.1.2.1.38.1.1.6.1.5 |