defaultCallCompletionBusySubscriberEnable
MX-EPSERV-MIB ·
.0.1700.1.900.100
Object
Default Enable/Disable Completion Of Calls To Busy Subscriber
(CCBS) Service
Enables/Disables the completion of calls to busy subscriber
(CCBS) service.
This service allows a caller to establish a call with a 'busy'
called as soon as this called is available to take the call.
If a specific configuration is set in the
EpSpecificCallCompletion.BusySubscriberEnable parameter and
the EpSpecificCallCompletion.EnableConfig parameter is set to
'Enable', then it overrides the current default configuration.
Context
- MIB
- MX-EPSERV-MIB
- OID
.0.1700.1.900.100- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- callCompletionGroup
- Siblings
- 12
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| callCompletionPollingGroup | node | - | .0.1700.1.900.10000 |
| defaultCallCompletionBusySubscriberDtmfMapActivation Completion Of Calls To Busy Subscriber (CCBS) Activation DTMF
Map
DTMF map the user can dial to enable the application of the
completion of calls to busy subscriber (CC… | scalar | MX-TCMxDigitMap | .0.1700.1.900.200 |
| defaultCallCompletionNoReplyEnable Default Enable/Disable Completion Of Calls On No Reply (CCNR)
Service
Enables/Disables the completion of calls on no reply (CCNR)
service.
This service allow… | scalar | MX-TCMxEnableState | .0.1700.1.900.300 |
| defaultCallCompletionNoReplyDtmfMapActivation Completion Of Calls On No Reply (CCNR) Activation DTMF Map
DTMF map the user can dial to enable the application of the
completion of calls on no reply (CCNR) service.
… | scalar | MX-TCMxDigitMap | .0.1700.1.900.400 |
| defaultCallCompletionDtmfMapDeactivation Call Completion Deactivation DTMF Map
DTMF map the user can dial to disable the application of the
completion of calls to busy subscriber (CCBS) and completion
of calls… | scalar | MX-TCMxDigitMap | .0.1700.1.900.500 |
| defaultCallCompletionExpirationTimeout Call Completion Expiration Timeout
Defines the delay after the call completion activation to
automatically deactivate the call completion if the call is
not completed.
… | scalar | Unsigned32 | .0.1700.1.900.600 |
| defaultCallCompletionMethod Default Call Completion Method
Selects the call completion method to detect that the call
completion destination is ready to complete the call.
* Monitorin… | scalar | Enumeration | .0.1700.1.900.650 |
| defaultCallCompletionAutoReactivateEnable Default Enable/Disable Call Completion Auto Reactivation
Enables/Disables the call completion auto reactivation.
When enabled, the completion of calls to bus… | scalar | MX-TCMxEnableState | .0.1700.1.900.700 |
| defaultCallCompletionAutoReactivateDelay Default Call Completion Auto Reactivation Delay
Defines the minimal delay to wait before executing a call
completion after its activation. This delay only applies to
ca… | scalar | Unsigned32 | .0.1700.1.900.750 |
| defaultCallCompletionEarlyMediaBehaviour Default Call Completion Early Media Behaviour
Defines how the call completion service needs to interpret the
reception of a progress message with early media.
… | scalar | Enumeration | .0.1700.1.900.775 |
| epSpecificCallCompletionTable Endpoint Specific Subscriber Services Enabling Configuration | table | - | .0.1700.1.900.800 |
| callCompletionConfigTable Call Completion Services Config
A table of the call completion configuration on the unit. | table | - | .0.1700.1.900.900 |